JAE Electronics’ DX4 series waterproof micro connectors are compatible with the micro-USB type 2.0 for small devices standardized by the USB Implementers Forum, Inc. The DX4 series features compatibility with the universal serial bus micro-USB cables and connectors specification Rev 1.01, superior rigidity with high-strength stainless steel shells, and two-piece shell structure for mid-mount type to prevent contact failure due to flux scattering during reflow. With the associated silicone rubber gasket, this product becomes IP65/67 rated.
Features |
Specifications |
- Compatible with universal serial bus micro-USB cables and connectors specification
- Connector type: USB 2.0 compatible, micro type
- Au plating over Pd over Ni is used for mating cycle durability and long product life
- Superior rigidity with high-strength stainless steel shell
- Two-piece shell structure for mid-mount type to prevent contact failure due to flux scattering during reflow
|
- Number of contacts: 5 positions
- Contact resistance: 30 mΩ maximum
- Dielectric withstanding voltage: AC500 VRMS per minute
- Insulation resistance: 1000 MΩ
- Rated current: 1.8 A (VBUS, GND)
- Others: DC 0.5 A
- Rated voltage: AC 30 VRMS
- Durability: 10,000 mating cycles
- Operating temperature: -30°C to 80°C
|