Spring Loaded Cylindrical Battery Holders with PCB

By Keystone Electronics 167

Spring Loaded Cylindrical Battery Holders with PCB

A broad selection of Keystone's popular plastic battery holders now include products with a PCB connector plug pre-installed to the end of 6" wires for simplified installations. Holders are available to accommodate a wide range of cylindrical batteries sizes including AA, AAA, CR2, 12 V, and N cells from major manufacturers. This series of holders is available for 1 to 4 cell configurations for each cell size. The battery pack can be quickly disassembled for maintenance or product upgrades using the releasable locking tab on the connector. The connector jacks are available in SMT or through-hole, are keyed to prevent improper installation, and maintain a secure connection between the battery pack and circuit board. The connector is also available in the Densi-Pak® covered holder series which accommodates AA and AAA cells.

Features

Battery Holders:
  • Material: Polypropylene base, nickel plated steel springs
  • Wire leads: 6.0" (150.0 mm) long 26 AWG wires, UL/CSA 1007
  • Connector nylon 6/6 UL 94-V0
  • Multi cell holders are wired in series
Connector Jacks:
  • Housing: nylon 6/6
  • Current rating: 3 A
  • Voltage rating: 250 VAC
  • Temperature range: -10°F (-25°C) to +185°F (+85°C)
  • Contact resistance: 20 mΩ max
  • Insulation resistance: 1000 MΩ min
  • Mounting: Solder Profile

Categories

Top