XMOS' sliceKIT makes it easy to evaluate and develop with xCORE multicore microcontrollers. This flexible design kit is comprised of a core board powered by a sixteen core xCORE flexible multicore microcontroller. It supports up to four I/O slice cards, and features XMOS' 16 Core L2 Device to deliver the deterministic, responsive processing required to handle a variety of peripheral interfaces, data processing, and control tasks. Each I/O slice is supplied with a demo application allowing you to get up and running quickly. The result is a framework of peripherals and I/O providing an exact fit chip for your system.
| sliceKIT Starter Kit |
Ethernet Slice Card |
- Core board with 16-core xCORE multicore microcontroller
- GPIO Slice Card
- Ethernet Slice Card
- XTAG2 USB-JTAG debug adaptor
- JTAG adaptor
- Power supply
|
- 10/100 Mb Ethernet phy
- RJ45 connector (cable not included)
- MII interface to xCORE
|
| Audio Slice Card |
Display Slice Card |
- Four analog input channels via two 3.5 mm jacks
- Four analog output channels via two 3.5 mm jacks
- MIDI I/O
- SPDIF output via coax
- On-board audio clocks
|
- 480 x 272 full color display
- 40-pin ZIF connector with ribbon cable to the display
- Resistive touch screen with 2 wire interface to xCORE
|
| GPIO Slice Card |
SDRAM Slice Card |
- 4 LEDs
- 2 buttons
- One RS232 parallel cable with DB9 connector (cable not included)
- 4-channel A/D via I²C interface
- Thermistor input via A/D
|
- 8 MByte SDRAM
- Clock speed up to 50 MHz
- Data rate up to 80 MBytes/second
|
| Multi UART Slice Card |
sliceKIT Core Board |
- 8 full duplex, RS232 UARTs via IO headers
- DB9 connector allowing RS232 parallel cable to connect to one of the UARTs (cable not included)
- Up to 115.2 Kbaud
- Configurable parity, stop bits, and bits per character
|
- Core board with 16 core xCORE multicore microcontroller
- Power supply
-
- *JTAG adaptor and XTAG2 are not included. If you do not have these, please see the SliceKIT Starter Kit
|
