TE Connectivity's Mini-Universal MATE-N-LOK connector system offers wire-to-wire and wire-to-board connections, with contacts on a 4.14 mm (.163 inch) centerline and current ratings up to 9.5 A maximum per line. Plug and receptacle housings allow wire-to-wire and wire-to-panel configurations and header assemblies offer wire-to-board connections in vertical and right angle configurations. Wire-to-wire, free-hanging or panel mount options are available in 1 to 15 position in-line, dual row, or matrix configurations and wire-to-board systems in dual row and matrix configurations are available in 2 to 24 positions. Hermaphroditic housings are also available in 2 to 4 positions for free-hanging applications. Crimp, snap-in pin and receptacle contacts are used to terminate 16 - 30 [0.05 mm² - 1.2 mm²] AWG wire with insulation diameters up to 3.20 mm. The Mini-Universal MATE-N-LOK Connector System also offers a splash-proof design allowing for use in areas where high humidity, intermittent liquid splashing, or foam-in applications require a sealed connector for improved electrical performance. The sealed system is available in select 2 to 16 positions.