40 GHz Coaxial Cable Assemblies

By Crystek Corporation 150

40 GHz Coaxial Cable Assemblies

Crystek Corporation's line of low loss cable assemblies feature rugged stainless steel solder-clamp construction with an attenuation of 0.90 dB/ft at 40 GHz. These assemblies offer shielding effectiveness of <-90 dB and an operating temperature range of -55°C to 85°C. They can also be special ordered as -55°C to 125°C.

The cables offer a minimum bend radius of 1.0 inch and are available in four lengths from 30 to 48 inches Electrical test data is supplied with each cable assembly. Electrically matched pairs are also available by special order.

  • Heavy duty adhesive strain relief
  • Silver-plated solid cooper center conductor
  • Inner braid: flat silver-plated copper strip
  • Outer braid: PC (round silver-plated copper braid)
  • Dielectric: low density microporous PTFE
  • FEP (fluorinated ethylene propylene) jacket
  • Outer 0.160 in (4.06 mm) in diameter
  • SST connectors, corrosion-resistant 303 stainless steel per ASTM-A582
  • GPBC (gold-plated beryllium copper) center pin
  • Gray jacket
  • -55°C to 85°C operating temperature
  • 1-inch minimum bend radius