TE Connectivity's VAL-U-LOK connector system offers wire-to-wire and wire-to-board connections with contacts on a 4.20 mm (.165 in) centerline and current ratings up to 9 A maximum per line. Plug and receptacle housings allow wire-to-wire and wire-to-panel configurations, and header assemblies offer wire-to-board connections in vertical- and right-angle configurations. VAL-U-LOK connector system configurations are available in 2 to 24 position dual-row, and 3 to 5 position single-row. Vertical headers are available with or without polarization pegs, with or without drain holes, and offering a blind mate version. The right-angle-headers are available with or without screw mount flanges. Crimp, snap-in pin, and socket contacts are used to terminate 26-16 (0.12 to 1.2 mm²) AWG wire with insulation diameters up to 3.10 mm (0.122 in).