Murata Power Solutions' OKL/OKL2-T/20-W5 series are non-isolated Point-of-Load (PoL) DC/DC power converters for embedded applications. The tiny form-factor is configured on a Land Grid Array (LGA) assembly measuring only 1.3 x 0.53 x 0.34 inches (33.02 x 13.46 x 8.75 mm). Applications include powering CPUs, datacom/telecom systems, distributed bus architectures (DBA), programmable logic, and mixed voltage systems.

The wide input range is 2.4 to 5.5 V_DC. The maximum output current is 20 A. Based on fixed-frequency synchronous buck converter switching topology, the high-power-conversion efficient Point of Load (PoL) module features programmable output voltage and On/Off control. These converters also include under-voltage lock-out (UVLO), output short-circuit, overcurrent, and over-temperature protections.

Features

• iLGA inspectable Land Grid Array
• 2.4-5.5 V_DC input voltage range
• Programmable output voltage from 0.6-3.63 V_DC
• Drives 1000 μF ceramic capacitive loads
• High-power-conversion efficiency at 93%
• Outstanding thermal derating performance
• Over-temperature and over-current protection
• On/Off control
• RoHS-6 hazardous substance compliance
• Optional sequence/tracking operation