ABB Embedded Power's SW / SC series power modules are isolated DC-DC converters that operate over a wide range of input voltage (VIN = 18 VDC to 36 VDC for SC modules and VIN = 36 VDC to 75 VDC for SW modules) and provide a single precisely-regulated output. This series is a low-cost, smaller-size alternative to the existing LW / LAW / LC with enhanced performance parameters. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, with a typical efficiency of 86% for 5.0 V / 3 A. Built-in filtering for both input and output minimizes the need for external filtering.
Features |
|
|
- Compliant to RoHS II EU Directive 2011/65/EC (-Z versions)
- Compliant to RoHS EU Directive 2002/95/EC with lead solder exemption (non-Z versions)
- Delivers up to 3.5 A output current 15 V (1 A), 12 V (1.25 A), 5.0 V (3 A), and 3.3 V (3.5 A)
- High efficiency: 86% at 5.0 V full load (VIN = 54 VDC)
- Low output ripple and noise
- Small size and low profile 27.94 mm x 24.38 mm x 8.5 mm (1.10 x 0.96 x 0.335 in)
- Meets the voltage insulation requirements for ETSI 300-132-2 and complies with/is licensed for basic insulation rating per EN 60950
|
|
- Industry-standard pin-out: TH version is LW series compatible
- Surface-mount (SMT) or through-hole (TH)
- Remote ON / OFF (optional pin on TH version)
- Output overcurrent / voltage protection
- Single tightly-regulated output
- Output voltage adjustment trim ±10%
- Wide operating temperature range (-40°C to +85°C)
- ISO 9001 and ISO 14001 certified manufacturing facilities
- Approved for basic insulation
|