Waterproof D-Sub Series

By EDAC Inc 155

Waterproof D-Sub Series

EDAC’s waterproof D-Sub series is rated to IP67 and can be mated to standard D-Sub standard density and D-Sub high density connectors. With EDAC’s water-resistant D-Sub system, the back-potted and O-ring mounted panel connectors always ensure full IP67 conformity whether mated or unmated, and in especially harsh environments can be further protected by an waterproof end cap when unmated. EDAC’s waterproof D-Sub series offers waterproof hoods and waterproof caps that mate with the D-Sub cable end connector. The hood has a compression ring to stop the ingress of water via the cable entry point at the rear, and a sealing skirt at the connector interface to prevent liquids from reaching the connectors. The cable-end connection will not itself meet IP67 when unmated unless a waterproof cap with an internal rubber seal is fitted. Once mated the total D-Sub connection interface, not just the panel mount D-Sub connector, will conform to IP67.

  Video

EDAC Waterproof DSub and USB Connector Video

Categories

Top