NXP's PCA9848 is an ultra-low voltage, octal bidirectional translating switch controlled via the I2C-bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Any or all SCx/SDx channels can be selected, determined by the programmable control register. This feature allows multiple devices with the same I2C-bus address to reside on the same bus. The switch device can also separate a heavily loaded I2C-bus into separate bus segments, eliminating the need for a bus buffer.
| Features and Benefits |
|
|
- Ultra-low-voltage operation, down to 0.8 V to interface with next-generation CPUs
- One-of-eight bidirectional translating switch
- Fast-mode Plus (Fm+) I2C bus interface logic; compatible with SMBus standards
- Active LOW reset input
- 2 address pins allowing up to 16 devices on the I2C bus
- Channel selection via I2C bus
- Power up with all switch channels deselected
- Low RON switches
- Allows voltage level translation between 0.8 V, 1.8 V, 2.5 V, and 3.3 V buses
- Reset via I2C bus software command
|
|
- I2C Device ID function
- No glitch on power-up
- Supports hot insertion since all channels are deselected at power on
- Low standby current
- 3.6 V tolerant inputs
- 0 Hz to 1 MHz clock frequency
- ESD protection exceeds 6000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101
- Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
- Package offered: TSSOP24
|
| Applications |
|
|
- Computing: I2C bus isolation in larger server platforms
- Industrial: enabling multiple slaves with the same I2C address
|
|
- Commercial: obscuring I2C slaves for direct detection
- Automotive: protecting sensitive I2C master devices from overstress damage
|
