ADC344x Analog-to-Digital Converters

By Texas Instruments 49

ADC344x Analog-to-Digital Converters

Texas Instruments' ADC344x are a high-linearity, ultra-low power, quad-channel, 14-bit, 25 MSPS to 125 MSPS, ADC family. The devices are designed specifically to support demanding, high input frequency signals with large dynamic range requirements. An input clock divider allows more flexibility for system clock architecture design while the SYSREF input enables complete system synchronization. The ADC344x family supports serial low-voltage differential signaling (LVDS) in order to reduce the number of interface lines, thus allowing for high system integration density. The serial LVDS interface is two-wire, where each ADC data isserialized and output over two LVDS pairs. An internal phase-locked loop (PLL) multiplies the incoming ADC sampling clock to derive the bit clock that is used to serialize the 14-bit output data from each channel. In addition to the serial data streams, the frame and bit clocks are also transmitted as LVDS outputs.

Features
  • Quad-channel
  • 14-bit resolution
  • Single supply: 1.8 V
  • Serial LVDS interface
  • Flexible input clock buffer with divide-by-1, -2, and -4
  • SNR = 72.4 dBFS, SFDR = 87 dBc at fIN = 70 MHz
  • Channel isolation: 105 dB
  • Ultra-low power consumption:
    • 98 mW/Ch at 125 MSPS
  • Internal dither and chopper
  • Support for multi-chip synchronization
  • Pin-to-pin compatible with 12-bit version
  • Package: VQFN-56 (8 mm x 8 mm)

Categories

Top