Cypress Semiconductor's ARM Cortex-M4 MCU starter kit with Ethernet, USB, and audio is a low-cost development platform for the Cypress 200 MHz FM4 S6E2C-Series of ARM Cortex MCUs. The development kit enables rapid development of high-performance embedded systems using the Arduino™ Uno-compatible interface to connect Arduino shields for low-cost hardware expansion.
ARM Cortex-M4 FM4 S6E2C-Series MCU |
- 200 MHz ARM Cortex MCU with DMA
- 675 CoreMark® MCU
- Single precision IEEE 754 compliant floating point unit
- 2 MB Flash, 256 KB SRAM, and 190 GPIOs
- Communication interfaces:
- 10/100 Ethernet (IEEE 802.3), USB host, USB device, CAN, LIN, high-speed quad SPI, I²S, I²C, and UART
|
Arduino Uno Footprint with Onboard Sensors |
|
Kit Contents |
- Arduino Uno compatible footprint
- Onboard sensors: accelerometer and photo transistor
- External peripherals: stereo codec, SRAM, serial Flash, and multi-color LEDs
- CMSIS-DAP interface: programming and debugging of the S6E2CC MCU
|
|
- FM4 S6E2C series board, USB Standard-A to Micro-B cable, and FM4 Starter Kit Quick Start Guide
|