Marking and identification of contents in pipes and piping systems is important to safety and maintenance. Panduit's pipe markers are designed to visibly identify contents, flow directions and hazard classification, thus promoting a safe working environment. These markers meet or exceed ASME (ANSI) A13.1-2007 recommendations for size, color, and visibility.
TIA-1005-A M.I.C.E Rated Product Selection Guide
| Installation Recommendations |
|
- Above or below center visual line of pipe
- Frequent intervals on straight pipe runs
- Close to valves
- Near branches and Ts
- Any change in direction
- Before and after pipe going through walls
|
|
| |
| Directional Flow Arrow Tapes (PPMR) |
|
Self-Stick Vinyl (PPMA) |
- 0.006" self-adhesive vinyl
- Available in 1", 2", and 4" widths
- 54' and 108' rolls
- Provide 360° visibility for flow direction, with repeated arrows on the tape’s length
|
|
- 0.004" flexible vinyl marker has UV-resistant polyester overlaminate with high-tack, acrylic adhesive back
- Included arrow provides proper directional flow marking
- Durable, protective gloss surface withstands fading, abrasions, splashes, grease, dust, and dirt
- Service temperature is -20°F to 176°F
|
| |
| Roll Form Pipe Markers |
|
Roll Tape Pipe Markers (Click here for list of parts) |
- Wrap around virtually any size pipe when you have multiple pipes or pipes of unknown sizes.
- Unroll, measure, and easily cut to length on-site for proper fit
- 0.004" gloss, over laminated poly vinyl marker wraps to adhere to itself
- High-tack, acrylic adhesive back stays on dirty, greasy, and rusty pipes
- Legend and arrow repeated, upright and upside-down, for universal direction and visibility
- Service temperature is -20°F to 140°F
- Available 8" x 30' or 12" x 30' in rolls
|
|
- Easily mark pipes quickly at various locations along a piping system
- 72 identical legends per roll, with perforations between each length
- Use in continuous lengths, or tear at perforations
- 0.006" vinyl with protective laminate surface
- Peel-off liner with self-adhesive back applies to smooth, clean, dry surface
- Service temperature is -20°F to 140°F
- Available in 1" x 54-ft. or 2" x 54-ft. rolls
|
| |
| Snap On Pipe Markers (PPMS) |
|
IIAR Ammonia Pipe Markers |
- Precoiled, heavy gauge 0.020" rigid vinyl plastic is lightweight, yet durable to withstand tough industrial environments
- Fits over pipes with dirty, greasy, or rough surfaces or other less than perfect surfaces
- Easy to remove and reapply
- Service temperature range is -4°F to 158°F (not recommended for hot pipes)
|
|
- Identify ammonia refrigeration piping and system components
- 0.004" flexible vinyl, self-sticking markers have high-tack adhesive backed with liner
- One legend with directional flow arrows on each end to cut off for proper placement
- Glossy UV-resistant surface withstands dust, dirt, and grease
- Service temperature range is -20°F to 176°F
- Install onto clean smooth pipe surface
|
