TPS54560 DC-DC Converter with Eco-Mode™

TPS54560 DC-DC Converter with Eco-Mode™

Texas Instruments' TPS54560 is a 60 V, 5 A, step down regulator with an integrated high side MOSFET. The device survives load dump pulses up to 65 V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no-load supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the enable pin is pulled low.

Undervoltage lockout is internally set at 4.3 V but can be increased using the enable pin. The output voltage start up ramp is internally controlled to provide a controlled start up and eliminate overshoot.

A wide switching frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.

The TPS54560 is available in an 8-terminal thermally enhanced HSOP PowerPAD™ package.

  • High efficiency at light loads with pulse skipping eco-mode
  • 92 mΩ high-side MOSFET
  • 146 µA operating quiescent current and 2 µA shutdown current
  • 100 kHz to 2.5 MHz fixed switching frequency
  • Synchronizes to external clock
  • Low dropout at light loads with integrated BOOT recharge FET
  • Adjustable UVLO voltage and hysteresis
  • 0.8 V 1% internal voltage reference
  • 8-terminal HSOP with PowerPAD package
  • -40°C to 150°C TJ operating range
  • Create a custom design using the TPS54560 with the WEBENCH® Power Designer
  • Industrial automation and motor controls
  • Vehicle accessories: GPS, entertainment
  • USB dedicated charging ports and battery chargers
  • 12 V, 24 V, and 48 V industrial, automotive, and communications power systems