EK-H5 Humidity and Temperature Sensor Evaluation K

By Sensirion 94

EK-H5 Humidity and Temperature Sensor Evaluation K

The EK-H5 evaluation kit is made for running Sensirion’s humidity and temperature sensors. A USB dongle with USB to I2C translator capabilities allows for connecting the sensor directly to the USB port. With the accompanying viewer software, it is possible to communicate with the sensors, display measured values, and export data into a csv file. The evaluation kit is available in two versions. The standard version is available for sensors that can operate at 3.3 V, while the 1.8 V version is for the sensors operated at 1.8 V.

EK-H5 Contents EK-H5 1.8 V Contents
  • 1 EK-H5 USB stick with USB to I2C translator capabilities
  • 1 sensor cable of 1 m length with a plug for connecting the USB dongle with a combo connector for connecting a sensor on PCB or FPCB
  • 1 SHT31-DIS sensor, mounted on PCB
  • 1 SHT31-DIS sensor, mounted on FPCB
  • 1 SHT21 sensor, mounted on PCB
  • 1 EK-H5 USB stick with USB to I2C translator capabilities
  • 1 sensor cable of 1 m length with a plug for connecting with a USB dongle and a ZIF connector for connecting with a sensor on FPCB and level shifter board integrated into the cable which converts the 3.3 V on the USB dongle side to 1.8 V on the sensor side
  • 1 SHTC1 sensor, mounted on FPCB
  • 1 SHTW2 sensor, mounted on FPCB
  • 1 STSC1 sensor, mounted on FPCB

Categories

Top