Using Thales Visionix's proprietary MEMS technologies and advanced signal processing techniques, the NavChip achieves a level of performance, miniaturization, and environmental ruggedness superior to other IMUs of its size. The NavChip is especially well-suited for embedded applications where extremely small size, low cost, and low power consumption are required. It is fully factory calibrated and temperature compensated over an operating range of -40°C to +85°C. NavChip evaluation kits are available to help users get applications up and running quickly.
| Features |
|
|
- Low power consumption 135 mW
- Gyro bias in-run stability 5°/hr
- Fully-compensated ΔΘ and ΔV outputs
- Angular random walk 0.18°/√hr
- Velocity random walk 0.03m/s/√hr
- Full-scale angular rate of 2000°/s
- Full-scale acceleration of ±16g
- Selectable built-in test (BIT) modes for commanded and continuous diagnostic monitoring
- Factory calibrated bias, scale factor, and misalignment (-40°C to +85°C)
|
|
- TTL UART or SPI-compatible data output interfaces
- Embedded temperature sensors
- Selectable output data types and rates
- External sync pin can accept optional GPS pulse-per-second or faster synchronization signal
- Single supply operation 3.25 V to 5.5 V
- Small 12.5 mm x 24.5 mm x 5.4 mm
- Lightweight 3 g
- Evaluation adapter boards available
|
| Applications |
|
|
- Augmented and virtual reality
- Unmanned systems
- Robotics
- Camera and antenna stabilization
|
|
- Pedestrian navigation
- GPS/INS integration
- Aiming and alignment
|
