Panduit offers copper TG style jack modules with enhanced Giga-TX™ technology which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist; forward motion termination places no impact on critical internal components for maximum reliability.
TIA-1005-A M.I.C.E Rated Product Selection Guide
| Cat5E Jack Features |
|
|
- Exceeds ANSI/TIA-568-C.2 Category 5E and IEC 60603-7-2 component standards from 1 MHz to 100 MHz
- Terminates full range of 22 AWG to 26 AWG conductors (standard, right angle, shuttered jacks) allowed per ANSI/TIA-568-C.2
|
|
- UL 1863 Approved; UL 2043 approved (standard, right angle, shuttered)
- Operating temperature of -10°C to +65°C (+14°F to +149°F)
|
| Cat6 Jack Features |
|
|
- Exceeds ANSI/TIA-568-C.2 category 6 and IEC 60603-7-4 Components from 1 MHz to 250 MHz
- Terminates full range of 22 AWG to 26 AWG conductors (standard, right angle, shuttered jacks) allowed per ANSI/TOA-568-C.2
|
|
- Superior headroom performance supported in densities up to 48 in 1 RU
- Meets IEC 60512-99-001 for 2500 cycles of engaging and separating conductors under electrical load
|
| Cat6A Jack Features |
|
|
- Exceeds ANSI-TIA -568-C.2 Category 6A and IEC 60603-7-41 component standards from 1 MHz to 500 MHz
- Contacts plated with 50 micro inches of gold
|
|
- Accept 6- and 8-position modular plugs without damage
- Terminates full range of 22 AWG to 26 AWG conductors (standard, right angle, shuttered jacks) allowed per ANSI/TIA-568-C.2
|
