Cypress' EZ-PD CCG3PA is a USB Type-C and Power Delivery controller that is an ideal single-chip solution enabling applications such as power adapters, mobile chargers, car chargers, and power banks with industry-leading Type-C technology.
| Features |
|
|
- USB Type-C and Power Delivery 3.0 programmable power supply
- Integrated digital blocks
- Four timers, counters, and PWMs and up to 12 GPIOs
- Two SCBs for configurable master/slave I2C, SPI, or UART
- Integrated analog blocks
- 30 V-tolerant regulator
- VBUS-to-CC short protection
- Integrated voltage (VBUS) regulation and current sense amplifier
- Two high-voltage PFET gate drivers
- Two VBUS discharge NFET
|
|
- 2x legacy/proprietary charging blocks: BC v1.2, Apple charging, Qualcomm charging 4.0, Samsung AFC
- System-level fault protection
- On-chip OVP, OCP, UVP, and SCP
- Supports OTP through integrated ADC circuit
- 32-bit MCU subsystem
- Arm® Cortex®-M0 CPU
- 64 KB Flash
- 8 KB SRAM
- Packages: 24-pin QFN and 16-pin SOIC
- Supports extended industrial temperature range (-40°C to +105°C)
|
CY4532 EZ-PD CCG3PA Evaluation Kit (EVK)
The EZ-PD CCG3PA EVK can be leveraged as an evaluation vehicle for USB Type-C power adapter (PA), USB Type-C mobile charger, and USB Type-C power bank (PB) applications. The EVK is configurable for both PA and PB applications.
EZ-PD CCG3PA USB Type-C and Power Delivery Reference Designs
Cypress has full USB Type-C and Power Delivery reference designs available to help speed the design cycle including schematics, Gerber files, firmware, and more.
| Type-C Power Adapter/Mobile Charger |
|
|
- Integrates 30 V-tolerant regulator, including VBUS PFET gate drivers, OVP, and OCP circuitry
- Integrates voltage regulation and low-side current sense to support PD3.0 PPS and QC4.0
|
|
- Integrates VBUS-to- CC short protection and ESD protection
- QC4.0 Cell Phone Charger Ref Design Link 1 (Power Integrations)
- QC4.0 Cell Phone Charger Ref Design Link 2 (Diodes)
|
| USB Type-C Car Charger |
|
|
- USB Type-C car charger
- Integrates 30 V-tolerant regulator, including VBUS PFET gate drivers, OVP, and OCP circuitry
|
|
- Supports PWM/I2C/GPIO interface to control VBUS
- Integrates VBUS to CC short protection and ESD protection
- Car Charger Ref Design Link
|
