Texas Instruments' LMZM33602 and LMZM33603 power module are easy-to-use integrated power solutions that combine a 2 A/3 A, step-down, DC/DC converter with power MOSFETs, a shielded inductor, and passives into a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and magnetics part selection from the design process.
The 9 mm x 7 mm x 4 mm 18-pin QFN package is easy to solder onto a printed circuit board and allows a compact, low-profile, point-of-load design. The full feature set, including power good, programmable UVLO, pre-bias start-up, and overcurrent and over-temperature protection, make the LMZM33603 an excellent device for powering a wide range of applications.
Features |
|
|
- Complete integrated power solution
- As few as four external components
- Minimum solution size < 100 mm2
- 9 mm x 7 mm x 4 mm QFN package
- All pins accessible from package perimeter
- Pin compatible with 3 A LMZM33603 (LMZM33602)
- Pin compatible with 2 A LMZM33602 (LMZM33603)
- Output voltage range:
- 1 V to 18 V (LMZM33602)
- 1 V to 13.5 V at 3 A (LMZM33603)
- 1 V to 18 V at 2 A (LMZM33603)
|
|
- Input voltage range: 4 V to 36 V
- Efficiencies up to 95%
- Adjustable switching frequency (200 kHz to 1.2 MHz)
- Allows synchronization to an external clock
- Power-good output
- Meets EN55011 Class B radiated EMI standards
- Operating IC junction range: -40°C to +125°C
- Operating ambient range: -40°C to +105°C
- Create a custom design using the LMZM33602 with the WEBENCH® Power Designer and the LMZM33603 with the WEBENCH® Power Designer
|
Applications |
|
|
- Factory and building automation
- Smart grid and energy
- Industrial
|
|
- Medical
- Defense
- Inverted output applications
|