9296 BTB Jumper

By AVX Corporation 90

9296 BTB Jumper

Developed in conjunction with the 2.5 mm STRIPT™ contact from AVX, the 9296 BTB jumper system provides additional mating tolerance absorption over traditional connector systems in linear or coplanar applications. By designing the 709296001025016 contact without a wire stop, the pin header can pass straight through the contacts until the final seating/mating dimension is achieved. Allowing for internal pin clearance, boards and modules can be plugged together without worrying about potentially critical tolerance stack-up issues.

Features
  • Absorption of PCB and module mating tolerances by allowing the unrestricted pin to pass through the contact by eliminating the traditional wire stop
  • Two different pin lengths to accommodate board-to-board and module-to-module connections
  • The unique geometry of the insulator lends itself to water tightness when matched with a corresponding housing cavity
Applications
  • Designed to mate with 709296001025016 horizontal PCB contact
  • Single and dual pin connections between linear PCBs
  • 38 mm pin allows for modules to be connected where the PCB is recessed within the plastic housing

Categories

Top