ST25DV-PWM Series Dynamic NFC/RFID Tag IC

By STMicroelectronics 53

ST25DV-PWM Series Dynamic NFC/RFID Tag IC

STMicroelectronics’ ST25DV02K-W1/W2 series of dynamic NFC/RFID tags are ISO/IEC 15693 NFC Forum type 5 devices with pulse width modulation (PWM) outputs controlled by contactless interface. They support all ISO/IEC 15693 modulations, coding, sub-carrier modes, and data rates. This series of ICs offers a 13.56 MHz long-range interface compatible with NFC phones and readers. The PWM output can be programmed independently and securely, allowing a large field of application. The IC provides a live update of PWM parameters by contactless interface, extending the user experience. ST25DV02K-W1 offers one PWM output while ST25DV02K-W2 offers two PWM outputs. The devices offer data protection of up to four independent areas, including the PWM control area, with flexible protection mechanism based on 32-/64-bit passwords.

Features
  • PWM outputs 
    • Up to 2x independent outputs (1x with ST25DV02K-W1; 2x with ST25DV02K-W2)
    • From 488 Hz to 31,250 Hz
    • 62.5 ns pulse width resolution (from 15-bit resolution at 488 Hz to 9-bit resolution at 31.25 kHz)
    • Accuracy: ±10% overtemperature range
    • No need for external oscillator
    • Supply voltage from 1.8 V to 5.5 V, independent from contactless interface
    • Independent push-pull outputs (up to 4 mA drive capability per output; adjustable output drive for low power and low noise application)
    • Live update of PWM parameters controlled by contactless interface
  • Contactless interface 
    • Based on ISO/IEC 15693 and NFC Forum type 5 tag
    • Supports all ISO/IEC 15693 modulations, coding, sub-carrier modes, and data rates
    • Single and multiple blocks read
    • Internal tuning capacitance: 28.5 pF
  • Memory
    • 2-kbits of EEPROM
    • Accessible in blocks of 4x bytes
    • 5 ms typical write time (one block)
    • Data retention: 40 years
    • Write cycles endurance: 100k write cycles at 85°C
  • Data protection 
    • Up to 4 independent areas, including the PWM control area, with flexible protection mechanism based on 32-/64-bits passwords
    • System configuration: write protection by 32-bit password
    • TruST25™ digital signature mechanism for authentication
  • Temperature range:
    • Contactless interface: -40°C to +85°C
    • PWM interface: -40°C to +105°C
  • Package 
    • 8-pin packages
    • ECOPACK2® (RoHS compliant)

Categories

Top