Split Bobbin Two-4-One™ Power Transformers

By Signal Transformer 222

Split Bobbin Two-4-One™ Power Transformers

Signal Transformer's Two-4-One power transformers use split bobbin construction which is a method of winding the transformer's primary and secondary, side-by-side on a bobbin with an insulation barrier between the two windings. Split bobbin construction provides superior isolation and low capacitive coupling. These transformers offer chassis mounting style and a single or dual primary winding with a single secondary winding. The Two-4-One transformers are available in 241 series and 241-L series transformers, which offer lead wires, and DP-241 series which is a dual primary 115 VAC / 230 VAC. These transformers meet industry safety standards. The series is recognized to UL 506/UL 5085-1, File # E63829 and CSA certified to C22.2 #66.1, File # 221070.

Resources

  • Linear Transformer At-A-Glance
Features
  • Constructed in split bobbin winding style
  • Provides superior isolation
  • Low capacitive coupling
  • 241-L series features lead wires
Specifications
  • Power rating range 2.4 VA to 100 VA
  • High potential (HiPot) dielectric strength: 2500 VRMS
  • Single or dual primary windings
  • Single center tapped secondary winding
  • Solder lug/quick connect type terminals
  • Class B (+130°C) insulation properties: UL 1446 E66312
  • 50/60Hz
Safety Agency Certification
  • UL recognized to UL 506/UL 5085-1, File #E63829
  • CSA certified to C22.2 #66.1, File #221070

Categories

Top