The Trenz Electronic TE0741 is an industrial-grade FPGA module integrating a Xilinx Kintex®-7 FPGA, eight multi-gigabit transceivers, 32 MB Flash memory for configuration and operation, and powerful switch-mode power supplies for all onboard voltages. A large number of configurable I/Os are provided via rugged high-speed stacking strips.
All this on a tiny footprint smaller than a credit card, at a competitive price. Modules in 4 cm x 5 cm form factor are fully mechanically- and largely electrically-compatible among each other.
The TE0741 module is available in four different logic densities (70T, 160T, 325T, and 410T).
Features
- 256 Mbit (32 MB) quad-SPI Flash memory (for configuration and operation) accessible through:
- FPGA
- JTAG port (SPI indirect)
- 8 MGTs (multi-gigabit transceivers)
- FPGA configuration through:
- JTAG (B2B connector)
- SPI Flash memory
- 25 MHz low-jitter oscillator with shutdown control
- Programmable quad clock generator (Silicon Labs Si5338)
- Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
- Up to 144 (94 for 70T) single-ended FPGA I/O pins available on B2B strips
- Onboard high-efficiency DC-DC converters
- MGT voltage regulators with control enable
- Core voltage regulator: 20 A (2 x Enpirion DC/DC regulators with load-sharing)
- Supply voltages: either 3.3 V or 3.3 V and 5 V
- Two user LEDs
- One DONE FPGA pin LED
- AES bitstream encryption
- Evenly spread supply pins for good signal integrity
Applications
- Avionics
- LED-backlit flat panel displays
- 3D TVs
- LTE baseband solutions
- Video over IP solutions
