Amphenol ICC's Minitek Pwr 3.0 is a flexible and comprehensive solution designed for power applications with current rating up to 5 A per circuit. It is available in two to 24 circuits for dual row and two to 12 circuits for single row products. Crimp, snap-in header, and receptacle contacts are used to terminate 30 AWG to 20 AWG wires. Header and receptacle housings allow wire-to-wire and wire-to-board configurations. Crimping and removal tools are available for wire harness assembly. Header assemblies for wire-to-board interconnections include vertical and right-angle components. These wave solder headers are also available in through-hole configurations.
Resources
- Minitek® Pwr 3.0 Datasheet
- Minitek® Pwr 3.0 Product Presentation
- Minitek® Pwr 3.0 Product Specification
- Minitek® Pwr 3.0 Application Specification
Features
- Low insertion force for installation of crimped terminal
- Fully isolated terminals
- Positive locking on housing with low thumb latch operation
- Fully polarized housings
- Scoop-proof housings
- High retention force in housing
- Glow wire compliant option
- BMI option
- UL94V-0 flammability rated LCP material
- RoHS compliant and lead-free
Benefits
- Easy to use
- Prevents terminals from potential damage during operation
- Ensures secure mating retention
- Prevents accidental mismating
- Ensures terminals and header pins are not damaged for angled mating
- Well secured terminals in the housing
- Complies with International Standard IEC 60335-1 for household appliances
- Allows ±2.54 mm gatherability for blind mating
- High flammability rating
- Meets health and safety requirements
- Meets environmental, health, and safety requirements
