SolaHD's SDN-C performance DIN rail series power supplies offer high-performance specifications and extensive international certifications, making them suitable for extreme environments including hazardous locations and off-shore applications. Features like wide operating temperature range, power boost capability, and adjustable output voltage ensure reliable operation in harsh industrial environments. Parallel operation, extensive LED diagnostics, and universal AC or DC input voltage simplify installation and maintenance. For added reliability, the SDN-C power supplies can be used with the SolaHD redundancy modules to provide redundant power supply operation.

Features

• 5-year limited warranty
• Extensive international hazardous location certifications (Class I Zone 2, ATEX, IECEx, and ExEAC)
• Hazardous location temperature code (T-Code) rating of T4
• International off-shore certifications (ABS and DNV-GL)
• PowerBoost™ enables short duration overload capability to start loads with high inrush current
• Dual output terminals for convenience in wiring
• Three LEDs provide extensive diagnostics. DC OK relay to provide diagnostic information to a PLC, controller, or monitoring system
• Universal AC and DC input voltages to accommodate global requirements
• Wide operating temperature range of -40°C to +70°C accommodates both extreme hot and cold environments
• Active power factor correction on most models
• Parallel operation capability standard
• Supports redundant power supply operation using optional SDN redundancy modules
• UL recognized component, Haz. Loc. Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, AEx nA nC IIC, Ex nA nC IIC
• 1-phase: 43 Hz to 67 Hz; 3-phase: 50/60 Hz
• Input voltage range 1-phase: 100 V_AC to 240 V_AC; 3-phase: 380 V_AC to 480 V_AC
• Output power: 120 W to 960 W
• Output voltage range: 12 V (12 V_DC to 15 V_DC adj.) or 24 V (23.5 V_DC to 28.5 V_DC adj.)
• Overload capability: >30.5 V_DC but <33 V_DC, auto recovery
• Status indicator: three status LEDs (input, output, and alarm)
• Mounting DIN TS35/7.5 or TS35/15