STLINK-V3MINI Debugger/Programmer for STM32 MCUs

By STMicroelectronics 699

STMicroelectronics' STLINK-V3MINI is a standalone debugging and programming mini probe for the STM32 microcontrollers (MCUs). The JTAG/serial wire debugging (SWD) interfaces are used to communicate with the STM32 MCUs that are located on an application board.

The STLINK-V3MINI provides a virtual COM port (VCP) interface that allows the host PC to communicate with the target MCU through one UART. The STLINK-V3MINI is a portable, easy-to-use debugger/programmer including the STDC14 interface with an included STDC14 flat cable.

Features

Standalone probe
STDC14 debug connector (1.27 mm pitch) and the STDC14 to STDC14 flat cable
Self-powered through a USB connector (micro-B)
USB 2.0 high-speed compatible interface
Direct firmware update (DFU) support
Drag-and-drop Flash programming
Two color LEDs:
- Communication
- Power
Includes STDC14 signal protection

JTAG/SWD:
- Application voltage support: 3 V to 3.6 V
- Tolerant inputs: 5 V
- JTAG communication support
- SWD and serial wire viewer (SWV) communication support
VCP:
- Application voltage support: 3 V to 3.6 V (UART interface)
- Tolerant inputs: 5 V
- VCP frequency: up to 15 MHz

New Products:

STLINK-V3MINISTLINK-V3SET

Tags:

ProgrammingSemiconductors & Dev ToolsSTMicroelectronics

STLINK-V3MINI Debugger/Programmer for STM32 MCUs

Categories

Function

Product Type

Manufacturer