Automotive DirectDrive® amps, from Maxim, feature 4 V to 5.5 V single-supply operation and deliver 120 mW per channel into a 16 Ω load or 135 mW into a 32 Ω load.
By Maxim Integrated 103
Single ADA4077-1, dual ADA4077-2, and quad ADA4077-4 amplifiers feature extremely low-offset voltage and drift and unity-gain stable.
By Analog Devices Inc 382
Maxim's MAX9934 current sense amplifier has a single supply operating range of 2.5 V to 3.6 V and a gain error less than 0.25%.
By Maxim Integrated 138
Linear Technology's LTC6430-15 15 dB amplifier achieves high dynamic range in a 100 Ω differential environment from 20 MHz to over 1 GHz.
By Analog Devices Inc 130
The Linear Technology LT6109 is a complete high side current sense device that incorporates a precision current sense amplifier.
By Analog Devices Inc 147
INA333 instrumentation amplifier from TI has a great power-to-noise ratio, improves accuracy and stability, and prolongs battery life.
By Texas Instruments 204
Touchstone's TS12011/TS12012 series features a single unit comprised of a 0.6 V reference, a 20 µs analog comparator, and an operational amplifier.
By Touchstone Semiconductor 172
Touchstone's TS1005 operational amplifier is a bandwidth device with features including low power, 20 kHz gain bandwidth, and a precision CMOS operational amplifier.
By Touchstone Semiconductor 101
The AD8476 fully differential precision amplifier with integrated gain resistors for unity gain offers high performance and very low power.
By Analog Devices Inc 59
ADI's ADA4500-2 dual 10 MHz, 14.5 nV/√Hz, low power amplifier features rail-to-rail input and output swings.
By Analog Devices Inc 64
Touchstone's TS1003 operational amplifier is a high-performance analog integrated circuit optimized for ultra-long battery powered applications.
By Touchstone Semiconductor 101
Apex Microtechnology introduces the PA34x series of high-voltage, monolithic, MOSFET OP AMPs.
By Apex Microtechnology 81
Texas Instruments' low-cost instrumentation amplifiers have very low-power consumption and have the ability to operate over a wide single- or dual-supply range.
By Texas Instruments 94
ADI's AD8235 is the industry's smallest and lowest power instrumentation amplifier (in-amp) at 1.5 mm x 2.2 mm, wafer level chip scale package (WLCSP).
By Analog Devices Inc 57
ADI's AD8237 micropower, zero drift, rail-to-rail input and output instrumentation amplifier is ideal for battery powered instruments.
By Analog Devices Inc 92
Modules integrated into a single package offering a compact solution, reducing component count, shrinking PCB size, and simplifying Class D amplifier design.
By Infineon Technologies 67
Maxim's MAX9814 microphone amplifiers with AGC and low-noise microphone bias have 3 gain settings of 40 dB, 50 dB, and 60 dB.
By Maxim Integrated 465
SY88149NDL 1.25 Gbps burst-mode limiting amplifiers from Microchip have high sensitivity LOS/SD signal detect and low-noise LVPECL data outputs.
By Microchip Technology 49
Microchip's MCP6N11 INAs with gain set by two external resistors are optimized for single-supply operation with rail-to-rail input and output performance.
By Microchip Technology 71
Microchip's MCP6H01 op amp, ideal for 9 V and 12 V applications, has a wide supply voltage of 3.5 V to 16 V and rail-to-rail output.
By Microchip Technology 76