BC857 is a typical PNP type bipolar transistor. It is an electronic component used for amplification, switching and current control in electronic circuits.
By NXP 383
The 2N3819 is a bipolar field effect transistor (JFET), which is a semiconductor device commonly used in amplification and switching applications in electronic circuits.
By Central Semiconductor 249
ATmega128L is an 8-bit series of microcontrollers from ATMEL. It is the highest configuration of ATMEL's 8-bit series of microcontrollers.
By ATMEGA 277
Although TDA7377 and TDA7388 are both audio power amplifier chips produced by STMicroelectronics, they have obvious differences in channel configuration, output power and application range.
By STMicroelectronics 276
SS14 is a Schottky diode, also known as Schottky barrier diode or fast recovery diode.
By ON Semiconductor / Fairchild 294
The 2N3055 is a bipolar transistor used in power amplification and switching applications.
By Central Semiconductor 328
The PC817 is an Optocoupler or Optoisolator device, also known as an optocoupler isolator.
By Sharp Microelectronics 289
SG3525 is an integrated circuit chip commonly used to design and control switching power supply systems, especially for DC to AC inverter applications.
By STMicroelectronics 313
The LD1117S33TR is a low dropout linear voltage regulator commonly used in power management applications to provide stable output voltage.
By STMicroelectronics 259
SN6505BDBVR is an isolated driver chip produced by Texas Instruments, usually used for isolated power transmission or signal isolation applications.
By Texas Instruments 259
LMD18200T is an integrated circuit chip produced by Texas Instruments, mainly used as Motor Driver or Current Amplifier.
By Texas Instruments 213
The ATMEGA328-PU is a microcontroller chip produced by Atmel (now Microchip Technology).
By Microchip Technology / Atmel 241
TOP245YN is a switching power supply control integrated circuit (IC),
By Power Integrations 303
S8050 is an NPN type transistor used in low-power electronic circuits, especially in amplifiers, switchers, and linear applications.
By Abracon Corporation 378
The paired cable adopts the balanced transmission method.
By Belden Wire 233
A multi-conductor cable is a cable that consists of multiple conductors, usually metallic wires.
By TE Connectivity 364
The inverter is an electrical device that changes the voltage, frequency, phase number, and other electrical quantities or characteristics of the power system.
By ON Semiconductor 338
Both S8050 and 2N2222 can be used in small signal amplifiers to amplify weak input signals to larger amplitudes for further processing or transmission.
By ON Semiconductor / Fairchild 1012
A position sensor is a sensor that senses the position of the measured object and converts it into a usable output signal.
By Bourns 380
The sensor is generally composed of four parts: sensitive element, conversion element, conversion circuit and auxiliary power supply.
By Omron Automation and Safety 631