Desco's PCB edge protectors fit over the edge of printed circuit boards to protect against ESD and physical damage.
By Desco 174
Littelfuse's MP8000 are advanced motor protection electronic overload relays, fully programmable via Bluetooth.
By Littelfuse Inc 56
The SCS 8900 series of dissipative rubber mats and rolls meet ANSI/ESD S20.20 required limit and the recommendation of work surface standard ANSI/ESD S4.1.
By SCS 83
ACL Staticide’s nitrile ESD gloves safeguard against damage caused by static discharge and contamination.
By ACL Staticide, Inc. 83
ACL Staticide’s ESD knit gloves protect against static discharge without sacrificing ergonomic performance.
By ACL Staticide, Inc. 99
Bourns offers five Komatsulite mini-breaker (thermal cutoff device) design kits, including the HC series, LC series, KCA series, and NR series mini-breakers.
By Bourns Inc. 107
BEI Sensors’ optical isolator modules provide a robust output to receiving electronics, helping eliminate ground loops and reduce signal degradation.
By Sensata Technologies – BEI Sensors 135
Maxim's low-capacitance ±15 kV ESD-protection diode arrays are available in 4-bump WLP, 6-bump WLP, 9-bump WLP, 6-pin TDFN, and 12-pin TQFN packages.
By Maxim Integrated 142
Si826x opto driver devices use much less input turn-on current, and have an improved pulse-width distortion and propagation delay.
By Silicon Labs 157
MCC's 1000 mW Zener diodes in SOD-123 package with bonding structure offer low Zener impedance and low inductance.
By Micro Commercial Co 134
The 10 A, 45 V Schottky rectifiers offer low thermal resistance and high-forward surge current capability in a TO-277B low body profile package.
By Micro Commercial Co 116
STMicroelectronics offers a large number of rectifiers that meet AEC-Q101 standards as well as strict international automotive quality requirements.
By STMicroelectronics 104
A digital driver family with an optimal configuration, package, and footprint for a variety of opto-driver products.
By Silicon Labs 118
Diodes' ZXTR1005K4 and ZXTR1005PD8 help minimize circuit footprint while providing a fixed output and a high drive capability.
By Diodes Incorporated 41
Vishay FRED Pt® rectifiers have low forward voltage drop, low leakage current, and an ultrafast recovery time.
By Vishay Semiconductor/Diodes Division 75
TI's ISO7310C series of digital isolators have an integrated noise filter for applications located in harsh environments.
By Texas Instruments 81
Texas Instruments' TPD1S514 single-chip protection solution for the USB VBUS line or other power buses has bidirectional nFET switch ensures safe current flow.
By Texas Instruments 55
Infineon's HITFET family provides a higher-level of protection with over-temperature, short circuit, over-current, over-voltage, and ESD.
By Infineon Technologies 134
Analog Devices' ADuM3150 and ADuM4150 are 3.75 kV and 5 kVRMS, 6-channel SPIsolator™ digital isolators, optimized for isolated serial peripheral interfaces (SPIs).
By Analog Devices Inc 55
TI's ISO7842 digital isolators have a signaling rate up to 100 MBps, a wide supply range of 2.25-5.5 V, and has low power consumption.
By Texas Instruments 70