Microchip's PIC16F178x mid-range controller family of 8-bit MCUs has an on-chip 12-bit or 10-bit ADC, up to 3 op amps, up to 4 comparators, and an 8-bit DAC.
By Microchip Technology 133
PIC18F K22 MCUs with operating range from 1.8 to 5.5 V and 8 to 128 KB Flash memory are ideal for applications requiring robust operation or noise immunity.
By Microchip Technology 187
Microchip's PIC24F KL series of 16-bit microcontrollers with nanoWatt XLP for applications including medical, safety / security, and consumer.
By Microchip Technology 165
Configurable analog, large flash memory blocks, comprehensive clock generation and management circuitry are integrated into the Actel Fusion FPGAs from Microsemi.
By Microsemi SoC 103
Microsemi SoC's SmartFusion evaluation kit can communicate via Ethernet and HyperTerminal and features FPGA with hard ARM Cortex-M3 and programmable analog.
By Microsemi SoC 158
NXP's LPC4300 series combines high-performance, low-power ARM Cortex-M4 and ARM Cortex-M0 cores with a unique set of configurable peripherals.
By NXP Semiconductors 170
Delivering robust USB performance at a low cost, the LPC11U Cortex-M0 USB devices from NXP are compelling replacements for 8- and 16-bit USB MCUs.
By NXP Semiconductors 166
A 4-port, in-circuit programmer compatible with Cypress Semi MCUs and offers great flexibility and efficiency.
By RPM Systems Corp 182
Texas Instruments' AM335x general purpose EVM is a standalone test, dev, and eval module system that enables developers to write software and develop hardware.
By Texas Instruments 160
Texas Instruments' ultra-low-power DSP value lines are low-cost and low-power 16-bit processors used to help save energy and prolong battery life.
By Texas Instruments 223
TI's LM4F232 evaluation kits are a compact and versatile evaluation platform used with the Stellaris LM4F232 ARM® Cortex™-M4F-based microcontroller.
By Texas Instruments 141
MSP430AFE2x3 MCU's architecture and integrated low power modes are designed to extend the length of battery life in portable measurement applications.
By Texas Instruments 104
Ultra-low power MCU's features low supply voltage range, ultra low power consumption, and ultra fast wake-up from standby mode.
By Texas Instruments 133
OMAP-L132 C6-Integra DSP+ARM processors helps create devices with robust operating systems and rich user interfaces.
By Texas Instruments 289
Precision32™ mixed-signal MCUs are cost-effective and easy-to-use solutions that offer smart integration and customization pin-out and peripherals.
By Silicon Labs 243
Arduino's Leonardo microcontroller board, based on the ATmega32u4, contains everything needed to support the microcontroller.
By Arduino 182
Microchip's dsPIC33E digital signal controllers feature fast DMA with no cycle stealing, up to 70 MIPS DSC at 3.3 V, and single cycle 16 x 16 MAC.
By Microchip Technology 128
Intel®'s Stratix® III FPGA development kit is specifically designed for ease of use and rapid system integration.
By Intel® FPGAs 190
The Cyclone® III FPGA starter kit from Intel® offers low power consumption and a wide range of low-cost packages.
By Intel® FPGAs 216
The C8051F39x/7x family is the next generation of Silicon Labs’ best-selling C8051F33x mixed-signal MCUs. These MCUs range in flash size from 4 to 16 kB and are footprint and code-compatible with
By Silicon Labs 533