ON Semiconductor's AEC-Q100 qualified families of voltage output current sense amplifiers measure voltage across shunts at common-mode voltages.
By ON Semiconductor 151
ON Semiconductor's NCV816x and NCP16x families are linear regulators capable of supplying 250 mA to 700 mA current output current.
By ON Semiconductor 93
ON Semiconductor's NCP110 provides wide output range from 0.6 V up to 4.0 V with low noise and low VIN for high precision analog and Wi-Fi applications.
By ON Semiconductor 53
On Semiconductor's LV8548MCSLDGEVK motor driver solution kit simplifies the design process in motor applications for engineers with limited experience.
By ON Semiconductor 140
ON Semiconductor's 650 V, SuperFET III MOSFETs are designed for applications that include servers, telecom and industrial systems, and EV chargers.
By ON Semiconductor 126
ON Semiconductor’s Strata-enabled platform enables designers to evaluate a 4-port USB-PD source platform.
By ON Semiconductor 111
ON Semiconductor’s Strata-enabled platform enables designers to evaluate a dual 100 W USB-PD automotive charging system.
By ON Semiconductor 73
ON Semi's NCP71x family of linear voltage regulators are stable and accurate devices with ultra-low ground current consumption and a wide input voltage range.
By ON Semiconductor 100
ON Semi's NCD57000/NCD57001 are IGBT drivers with internal galvanic isolation, designed for high system efficiency and reliability in high power applications.
By ON Semiconductor 102
ON Semiconductor's silicon carbide (SiC) MOSFETs use a technology that provides superior switching performance and higher reliability compared to silicon.
By ON Semiconductor 158
ON Semiconductor’s NCP151 are dual linear regulators capable of supplying two independent 300 mA output currents from 1.7 V input voltage.
By ON Semiconductor 119
ON Semiconductor’s NCP1342 can enable no-load power consumption below 30 mW thanks to an integrated active X2 capacitor discharge feature.
By ON Semiconductor 162
ON Semiconductor’s NCL2801 current mode critical conduction mode (CrM) power factor controllers can provide THD performance over an extended operating range.
By ON Semiconductor 66
ON Semiconductor’s NCP13992 current mode resonant controllers implement 600 V gate drivers, simplifying layouts, and reduce external component count.
By ON Semiconductor 109
ON Semiconductor’s STK5x4Uxxxx-E 600 V IPM are highly integrated devices containing high voltage control from HV-DC to 3-phase outputs in a single, small SIP.
By ON Semiconductor 80
ON Semiconductor’s FUSB307B can implement up to four USB Type-C™ port controllers with USB-PD capabilities.
By ON Semiconductor 78
ON Semiconductor's FUSB340 is suited for the mobile device market and for use in Type-C applications where a reversible cable requires a switch.
By ON Semiconductor 74
ON Semiconductor's FUSB251 is a controlled overvoltage protection switch on CC and SBU pins in a Type-C™ interface port.
By ON Semiconductor 86
ON Semiconductor's RSL10 is a multi-protocol Bluetooth 5 certified radio system-on-chip (SoC) which brings ultra-low-power wireless technology to IoT.
By ON Semiconductor 71
ON Semiconductor’s Sigfox portfolio provides an important enabler for the implementation and proliferation of Internet of Things (IoT) applications.
By ON Semiconductor 88