Analog Devices' ADAU1701 audio digital signal processor (DSP) with two analog-to-digital converters (ADCs) and four digital-to-analog converters (DACs) is ideal for audio applications such as
By Analog Devices Inc 37
Nexperia's AXP family of Si-gate CMOS devices uses leading low threshold process technology and next generation packaging technology.
By Nexperia 138
Nexperia's 74AUP2G97 is a low-power, dual-PCB-configurable, multiple-function gate with Schmitt-trigger inputs.
By Nexperia 88
ADI's AD8452 precision analog front end, controller, and PWM for lithium ion battery test / formation systems.
By Analog Devices Inc 59
Linear Technology’s LT8609 has three options, with the standard having a fast switching edge speed and can operate in both pulse-skipping mode and burst mode.
By Analog Devices Inc 30
Maxim’s MAX30001CWV+ is an analog front-end (AFE) solution that includes biopotential and bioimpedance (BioZ) for wearable applications.
By Maxim Integrated 94
Texas Instrument's SN74AXC1T45 single-bit dual-supply bus transceivers can be used in level-translation applications for interfacing devices.
By Texas Instruments 108
NXP's voltage translators address the various applications that need a transition of I²C signals through multiple voltage domains without direct control.
By NXP Semiconductors 115
Texas Instruments' TLV7011 and TLV7021 devices are single-channel, micro-power comparators with push-pull and open-drain outputs.
By Texas Instruments 42
Nexperia's 74CVL8T959 dual supply shift register is an 8-bit serial-in or parallel-out configuration with a storage register and 3-state outputs.
By Nexperia 127
Texas Instruments' SN74AUP1G126 device is an output-enabled CMOS buffer that can be used in LED indicator applications that require low-power.
By Texas Instruments 32
Texas Instruments' SN74AUP1G06 connects to other open-drain outputs to implement active-low wired-OR or active-high wired-AND function.
By Texas Instruments 57
TI's 2N7001T signal converter is suitable for level-translation applications for interfacing between devices that operate at different interface voltages.
By Texas Instruments 46
TI's SN74AXCH8T245 dual-supply bus transceiver uses two independent power-supply rails and is fully specified for partial-power-down applications.
By Texas Instruments 52
Texas Instruments' SN74AXC8T245 devices are 8-bit, dual-supply non-inverting transceivers with bidirectional voltage level translation.
By Texas Instruments 64
Diodes’ PI4ULS5V108 is 5 V tolerant on I/O port which makes it compatible with TTL levels in industrial and telecom applications.
By Diodes Incorporated 84
Texas Instruments' TLV1805 40 V high-voltage comparator is ideal for applications such as MOSFET gate drivers and zero-crossing detectors.
By Texas Instruments 137
Texas Instruments' SN74AXC4T245 4-bit dual-supply bus transceiver is ideal for applications where a push-pull driver is connected to the data I/Os.
By Texas Instruments 65
Diodes' PI4GTL2002 allows bidirectional voltage translations between 0.8 V and 5.0 V without the use of a direction pin.
By Diodes Incorporated 134
STMicroelectronics’ TS880 series comparator can be used over a wide temperature range, keeping the current consumption at an ultra-low level.
By STMicroelectronics 88