TRINAMIC Motion Control's TMC8461 and TMC8462 are the first EtherCAT slave controllers with high voltage I/O and integrated real-time motor control peripherals.
By TRINAMIC Motion Control GmbH 42
TRINAMIC’s TMC4671 is designed to rapidly decrease time to market for highly performing servo controllers while maximizing drive efficiency and dynamics.
By TRINAMIC Motion Control GmbH 63
Trinamic's TMC2202-WA stepper motor drivers with integrated MOSFETs and wettable flank package are for use in automatic optical inspection of soldering joints.
By TRINAMIC Motion Control GmbH 38
TRINAMIC's TMC8670 is a FOC servo controller with a CANopen over EtherCAT® protocol stack, handling critical tasks faster than any software-based solution.
By TRINAMIC Motion Control GmbH 40
TRINAMIC's StealthChop™, SilentStepSticks, and evaluation boards work together for a total motion control system.
By TRINAMIC Motion Control GmbH 78
TRINAMIC's TMC2160-TA stepper driver IC interfaces between a motion controller and a high-power stepper motor to optimize every motor movement.
By TRINAMIC Motion Control GmbH 39
Trinamic's TMC5161 cDriver™ solution is an easy to use building block with a powerful integrated MOSFET driver stage and complete motion control features.
By TRINAMIC Motion Control GmbH 91
With TRINAMIC’s TMC6200 high-voltage gate driver it's easy to build a sophisticated drive with safety features and diagnostics.
By TRINAMIC Motion Control GmbH 69
TRINAMIC's TMC2209 is the ultimate stepper driver for desktop solutions, allowing stall detection and extremely silent operation at the same time.
By TRINAMIC Motion Control GmbH 49
TRINAMIC’s PANdrive™ smart mechatronic solutions includes high torque stepper motor, a motion controller/driver, spreadCycle™ chopper technology, and TMCL™.
By TRINAMIC Motion Control GmbH 57
TRINAMIC’s high performance bus based multi-axis stepper motor driver family is a ready-to-use solution for up to six bipolar 2-phase stepper motors.
By TRINAMIC Motion Control GmbH 417
TRINAMIC's PD42-1070 family was developed specifically to simplify the application of advanced power-control technology.
By TRINAMIC Motion Control GmbH 100
TRINAMIC’s PD42-1270 is a PANdrive smart stepper motor controlled via a CAN bus interface which comes with two firmware options, TMCL™ and CANopen®.
By TRINAMIC Motion Control GmbH 80
TRINAMIC's TMCM-1111-StepRocker-Servo is a single axis stepper motor controller/driver module for closed loop stepper motor servos.
By TRINAMIC Motion Control GmbH 65
TRINAMIC's PD42-x-1240 PANdrive™ stepper motor controllers include stepper motor with different lengths and different holding torques.
By TRINAMIC Motion Control GmbH 54
TRIMANIC's PD42-x-1370 PANdrive™ combines a stepper motor and driver forming an easy-to-use building block for motor and motion control with S-shaped ramping.
By TRINAMIC Motion Control GmbH 434
TRINAMIC's PD42-x-1670 closed-loop, smart BLDC motors are controlled via CAN bus interface and offer two firmware options, TMCL and CANopen.
By TRINAMIC Motion Control GmbH 73