Wurth Electronics’ IDC product technology allows cost effective connections between circuit boards based on permanent connection or removable connection.
By Würth Elektronik 45
Wurth Electronics’ pin and socket headers are available in top or bottom entry, straight or right angle types, different dimensions, and different packaging.
By Würth Elektronik 56
Wurth Electronics' earthing belts provide a solid connection and a wider range of frequencies to travel through so they reduce unwanted noise.
By Würth Elektronik 89
Wurth Electronics, one of the leading manufacturers for passive and electromechanical components, offers an array of products to assist in controlling EMI noise.
By Würth Elektronik 63
Wurth Electronics' earthing nylon clips provide a shielding connection with low impedance to the ground. These clips are available for cables from 3 mm to 15 mm in diameter, and are flexible,
By Würth Elektronik 102
Wurth Electronics' metallized plastic housing is an elegant, fast, and space-saving method to shield radiated interference from a D-SUB.
By Würth Elektronik 52
Wurth's WR-BTB series SMT board-to-board connectors are available in 40-, 64-, 80-, or 100-pin versions and various heights.
By Würth Elektronik 38
Wurth's REDFIT IDC connector is a solderless reversible direct plug-in connector with SKEDD technology and insulation displacement connection.
By Würth Elektronik 49
Wurth Electronics' WR-TBL series terminal blocks are available in many different connection types and offer large and modular terminal block possibilities.
By Würth Elektronik 109
Wurth Electronics' WR-COM series USB 3.1 Type-C™ connectors offer a long service life and are ideal for demanding industrial applications.
By Würth Elektronik 90
Wurth Electronics' card connectors are used in applications requiring identification modules and using pluggable non-volatile memory and compact flash (CF).
By Würth Elektronik 86
Wurth Electronics' WA-HST series tubes on small reels shrink when exposed to heat, protects cable connectors from corrosion, and prevents short circuits.
By Würth Elektronik 91
Wurth Electronics' REDCUBE portfolio has been extended with a reverse-type surface-mount terminal with internal through-hole.
By Würth Elektronik 158
Wurth Electronics’ WE-RJ45 series RJ45 connectors with THT pins for wave and reflow soldering are compatible with most ICs for Ethernet applications.
By Würth Elektronik 60
Wurth Electronics’ range of SMA series coaxial connectors contains a wide range of standard SMA solutions for frequencies up to 18 GHz.
By Würth Elektronik 73
Wurth Electronics’ WR-CAB flat ribbon cables are compatible with WR-MM and WR-BHD connectors as well as D-sub IDC connectors.
By Würth Elektronik 202
Wurth's USB Type-C™ development kit supports power delivery from SOURCE to SINK for up to 100 W and can work seamlessly with existing USB hosts.
By Würth Elektronik 52
The wire-to-board connectors from Würth Elektronik are the perfect choice when a disconnectable crimp style connector is required.
By Würth Elektronik 59
Wurth's WE-EHPI Energy Harvesting Transformers are best suited for applications where battery power is generated by energy harvesting.
By Würth Elektronik 109
Wurth Electronics offers its WS-TASU and WS-TASV tact switches that are 3.5 mm x 2.9 mm available in side push and SMD J-Bend with silver terminal plating.
By Würth Elektronik 46