MC9S08LL16CGT

Came only after the dispute

I put 5 + tk sold made repound. And so the redemption is stupid. Not even instructions. The fee is probably not bad. Of course about 100a i doubt but for the shurikov will go. See the photo. With the 4S you need to short-b and b1 and the contacts marked in the photo. For 3 s you need to short-b b1 b2 (there are platforms for smd jumpers.) and contacts (see photo). And for stupid buyers!! You can not put laptop batteries in the shurik and then write that the board does not work. Only high current. When installing, be sure to charge completely the scatter you need to achieve a minimum. Balancing approx 60ma wait a long time while levels. For charging, you can not use regular, buy chargers for 18650 with ss and cv. It is not yet clear about the exit of the lock mode. I will try to supplement if there are problems. On this fee little info in the internet. Most likely, you need to hang the electrolyte on + b and-c. Mosfets are probably chinese. The crystal must be meager.

2 months delivery to vladimir region, sad.