TPS62353YZGT

Mfr. #:: TPS62353YZGT
Description:: Switching Voltage Regulators 1A 3MHz Buck Converter
Lifecycle:: New from this manufacturer.
Datasheet:: TPS62353YZGT Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
More Information:: TPS62353YZGT more Information TPS62353YZGT Product Details

Product Attribute
Attribute Value

Manufacturer:: Texas Instruments

Product Category:: Switching Voltage Regulators

RoHS:: Y

Mounting Style:: SMD/SMT

Package / Case:: DSBGA-12

Output Voltage:: 0.75 V to 1.5375 V

Output Current:: 800 mA

Number of Outputs:: 1 Output

Input Voltage MAX:: 5.5 V

Topology:: Buck

Input Voltage MIN:: 2.7 V

Switching Frequency:: 3 MHz

Minimum Operating Temperature:: - 40 C

Maximum Operating Temperature:: + 85 C

Series:: TPS62353

Packaging:: Reel

Input Voltage:: 2.7 V to 5.5 V

Operating Temperature Range:: - 40 C to + 85 C

Product:: Voltage Regulators

Type:: DC/DC Converter

Brand:: Texas Instruments

Operating Supply Current:: 28 uA

Product Type:: Switching Voltage Regulators

Factory Pack Quantity:: 250

Subcategory:: PMIC - Power Management ICs

Unit Weight:: 0.007055 oz

Tags: TPS6235, TPS623, TPS62, TPS6, TPS

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TPS62353YZGT Description

***as Instruments: 1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 12-DSBGA -40 to 85

***ical: Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 0.75V to 1.5375V 0.8A 12-Pin DSBGA T/R

***ponent Stockers USA: 1.6 A SWITCHING REGULATOR 3350 kHz SWITCHING FREQ-MAX BGA12

*** Stop Electro: Switching Regulator, Voltage-mode, 0.8A, 3350kHz Switching Freq-Max

***ark: Switching Regulator IC; No. of Outputs:1; Output Voltage:1.5375V; Output Current:800mA; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; Input Voltage Primary Max:5.5V; Leaded Process Compatible:Yes ;RoHS Compliant: Yes

***ment14 APAC: IC, SYNC STPDN CONV 800MA 12DSBGA; Primary Input Voltage:3.6V; No. of Outputs:1; Output Voltage:1.5375V; Output Current:800mA; Voltage Regulator Case Style:DSBGA; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (19-Dec-2011); Accuracy %:2%; Adjustable Output Voltage Max:1.538V; Adjustable Output Voltage Min:750mV; Base Number:62353; Frequency:3MHz; Input Voltage Max:5.5V; Output Current Max:800mA; Output Voltage Max:1.538V; Package / Case:DSBGA; Supply Voltage Max:5.5V; Supply Voltage Min:2.7V; Switch Output Current Isw Max:1600mA; Termination Type:SMD; Voltage Regulator Type:Step Down (Buck)

***as Instruments: 1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 12-DSBGA -40 to 85

***ical: Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 0.75V to 1.5375V 0.8A 12-Pin DSBGA T/R

*** Stop Electro: Switching Regulator, Voltage-mode, 0.8A, 3350kHz Switching Freq-Max

***ark: Switching Regulator IC; No. of Outputs:1; Output Voltage:1.5375V; Output Current:800mA; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; Input Voltage Primary Max:5.5V; Leaded Process Compatible:Yes ;RoHS Compliant: Yes

***as Instruments: 1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 12-DSBGA -40 to 85

*** Stop Electro: Switching Regulator, Voltage-mode, 1.6A, 3350kHz Switching Freq-Max

***et Europe: Conv DC-DC Single Step Down 2.7V to 5.5V 12-Pin DS-BGA T/R

***ment14 APAC: IC, SYNC STPDN CONV 800MA 12DSBGA; Primary Input Voltage:5.5V; No. of Outputs:1; Output Voltage:1.538V; Output Current:800mA; Voltage Regulator Case Style:DSBGA; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (19-Dec-2011); Accuracy %:2%; Adjustable Output Voltage Max:1.538V; Adjustable Output Voltage Min:750mV; Base Number:62354; Frequency:3MHz; Input Voltage Max:5.5V; Output Current Max:800mA; Output Voltage Max:1.538V; Package / Case:DSBGA; Supply Voltage Max:5.5V; Supply Voltage Min:2.7V; Switch Output Current Isw Max:1600mA; Termination Type:SMD; Voltage Regulator Type:Step Down (Buck)

***as Instruments: 1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 10-VSON -40 to 85

*** Stop Electro: Switching Regulator, Voltage-mode, 0.8A, 3350kHz Switching Freq-Max, PDSO10

***ical: Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 0.75V to 1.5375V 0.8A 10-Pin VSON EP T/R

***ark: DC/DC Converter; No. of Outputs:1; Output Voltage:1.5V; Output Current:1A; DC/DC Converter Mounting:PCB SMT; DC/DC Converter Type:Non-Isolated; Input Voltage Max:5.5V; Input Voltage Min:2.7V; Leaded Process Compatible:Yes ;RoHS Compliant: Yes

***ical: Conv DC-DC 2.7V to 5.5V Step Down Single-Out 0.75V to 1.4375V 1.1A 12-Pin WLCSP T/R

***emi: 1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator

***r Electronics: Switching Controller, Voltage-mode, 1.1A, 3350kHz Switching Freq-Max, PBGA12

***rchild Semiconductor: The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.

***r Electronics: Switching Controller, Voltage-mode, 1.8A, 3350kHz Switching Freq-Max, PBGA12

***emi: 1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator

***rchild Semiconductor: The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.

***emi: 1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator

***r Electronics: Switching Controller, Voltage-mode, 1.6A, 3350kHz Switching Freq-Max, PBGA12

***rchild Semiconductor: The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.

***AS INSTUMENTS: The TPS6235x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6235x supports up to 800-mA load current and allows the use of small, low cost inductors and capacitors.

***INS: The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I2C interface down to 0.6 V, the device supports low-voltage DSPs and processors core power supplies in smart-phones, PDAs, and handheld computers.

***AS USD: The TPS6235x operates at 3-MHz fixed switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 2 µA.

***AS: The serial interface is compatible with Fast/Standard and High-Speed mode I2C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5 mV, for reprogramming the mode of operation (Light PFM, Fast PFM or Forced PWM) or disable/enabling the output voltage.

Market price

Part #	Description	Stock	Price
TPS62353YZGT DISTI # 296-32510-1-ND	IC REG BCK ADJ/PROG 0.8A 12DSBGA RoHS: Compliant Min Qty: 1 Container: Cut Tape (CT)	1344In Stock	100:$1.3120 10:$1.6320 1:$1.8200
TPS62353YZGT DISTI # 296-32510-6-ND	IC REG BCK ADJ/PROG 0.8A 12DSBGA RoHS: Compliant Min Qty: 1 Container: Digi-Reel®	1344In Stock	100:$1.3120 10:$1.6320 1:$1.8200
TPS62353YZGT DISTI # 296-32510-2-ND	IC REG BCK ADJ/PROG 0.8A 12DSBGA RoHS: Compliant Min Qty: 250 Container: Tape & Reel (TR)	1250In Stock	1250:$0.8671 500:$1.0465 250:$1.1960
TPS62353YZGT DISTI # TPS62353YZGT	Conv DC-DC Single Step Down 2.7V to 5.5V 12-Pin DS-BGA T/R - Tape and Reel (Alt: TPS62353YZGT) RoHS: Compliant Min Qty: 500 Container: Reel	Americas - 0	500:$0.8669 1000:$0.8249 1500:$0.7979 2500:$0.7709 5000:$0.7499
TPS62353YZGT DISTI # TPS62353YZGT	Conv DC-DC Single Step Down 2.7V to 5.5V 12-Pin DS-BGA T/R (Alt: TPS62353YZGT) RoHS: Compliant Min Qty: 250 Container: Tape and Reel	Europe - 0	250:€1.0289 500:€0.8979 1000:€0.7439 1500:€0.7419 2500:€0.7269
TPS62353YZGT	1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling	840	1000:$0.6800 750:$0.7100 500:$0.8400 250:$0.9900 100:$1.0600 25:$1.2100 10:$1.3000 1:$1.4400
TPS62353YZGR DISTI # 595-TPS62353YZGR	Switching Voltage Regulators 1A 3MHz Buck Converter RoHS: Compliant	2413	1:$1.5300 10:$1.3000 100:$1.0400 500:$0.9090 1000:$0.7530 3000:$0.7010 6000:$0.6750 9000:$0.6490
TPS62353YZGT DISTI # 595-TPS62353YZGT	Switching Voltage Regulators 1A 3MHz Buck Converter RoHS: Compliant	472	1:$1.7600 10:$1.5000 100:$1.2000 250:$1.2000 500:$1.0500 1000:$0.8680 2500:$0.8080 5000:$0.7780 10000:$0.7480
TPS62353YZGT	Switching Regulator, Voltage-mode, 1.6A, 3350kHz Switching Freq-Max RoHS: Compliant	6040	1000:$0.7900 500:$0.8300 100:$0.8700 25:$0.9000 1:$0.9700
TPS62353YZGT DISTI # 1755469	IC, SYNC STPDN CONV 800MA 12DSBGA RoHS: Compliant	3	1:$4.5000
TPS62353YZGT DISTI # 1755469	IC, SYNC STPDN CONV 800MA 12DSBGA RoHS: Compliant	0	1:£2.5000 10:£1.6000 100:£1.0800 250:£1.0500 500:£1.0200

Image	Part #	Description
	Mfr.#: TMS320DM8147SCYE2 OMO.#: OMO-TMS320DM8147SCYE2	Digital Signal Processors & Controllers - DSP, DSC DaVinci Digital Media Processor
	Mfr.#: BR24G256FVT-3GE2 OMO.#: OMO-BR24G256FVT-3GE2	EEPROM I2C BUS(2-Wre) 256K TSSOP-B8 EEPROM
	Mfr.#: ADP5052ACPZ-R7 OMO.#: OMO-ADP5052ACPZ-R7	Power Management Specialized - PMIC 5-CH IPS w/ Quad Buck Reg 200mA LDO
	Mfr.#: TPS3808G09DBVT OMO.#: OMO-TPS3808G09DBVT	Supervisory Circuits Programmable-Delay Supervisory
	Mfr.#: SN74AVC4T245RSVR OMO.#: OMO-SN74AVC4T245RSVR	Translation - Voltage Levels 4B Dual-Supply Bus Xceiver
	Mfr.#: MT47H64M16NF-25E IT:M TR OMO.#: OMO-MT47H64M16NF-25E-IT-M-TR	DRAM DDR2 1G 64MX16 FBGA
	Mfr.#: STM32F407IEH6 OMO.#: OMO-STM32F407IEH6	ARM Microcontrollers - MCU ARM M4 512 FLASH 168 Mhz 192kB SRAM
	Mfr.#: TPS65253RHDR OMO.#: OMO-TPS65253RHDR	Switching Voltage Regulators 4.5V-16Vin/2 Buck Converters
	Mfr.#: TPS65911AA2ZRCR OMO.#: OMO-TPS65911AA2ZRCR-TEXAS-INSTRUMENTS	Multi-Function Integrated Power Management IC 13 Output 98-Ball BGA T/R - Tape and Reel (Alt: TPS65911AA2ZRCR)
	Mfr.#: TMS320DM8147SCYE2 OMO.#: OMO-TMS320DM8147SCYE2-TEXAS-INSTRUMENTS	Processors - Application Specialized DaVinci Digital Media Processo

TPS62353YZGT

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes