TLE4998P4HALA1

Mfr. #:: TLE4998P4HALA1
Manufacturer:: Infineon Technologies
Description:: Board Mount Hall Effect / Magnetic Sensors POSITION&CURRENT SENSORS
Lifecycle:: New from this manufacturer.
Datasheet:: TLE4998P4HALA1 Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

Product Attribute
Attribute Value

Manufacturer:: Infineon

Product Category:: Board Mount Hall Effect / Magnetic Sensors

Package / Case:: SSO-4

Packaging:: Ammo Pack

Brand:: Infineon Technologies

Product Type:: Hall Effect / Magnetic Sensors

Subcategory:: Sensors

Part # Aliases:: SP000412106 TLE4998P4 TLE4998P4XA

Tags: TLE4998P4, TLE4998P, TLE4998, TLE499, TLE49, TLE4, TLE

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TLE4998P4HALA1 Description

***et Europe: Hall Effect Sensor 5mA Unipolar/Bipolar 5V 4-Pin SSO Ammo Pack

***Yang: TLE4998 - PROGRAMMABLE LINEAR HALL EFFECT SENSOR - Ammo Pack

***ineon SCT: TLE4986C-XAS-M47 - Infineon Technologies Hall switching sensor to measure speed or phase of pole/tooth wheels, PG-SSO-4, RoHS

***ineon: The linear Hall IC TLE4998P has been designed specifically to meet the requirements of highly accurate rotation and position detection, as well as for current measurement applications. The sensor provides a digital PWM signal, which is ideally suited for direct decoding by any unit measuring a duty cycle of a rectangular signal (usually a timer/capture unit in a microcontroller). Furthermore, it is possible to attach an external lowpass filter, which allows an A/D conversion using the sensor supply voltage as a reference. The output stage is an open-drain driver pulling the output pad to low only. Therefore, the high level must be obtained by an external pull-up resistor. This output type has the advantage that the receiver may use even a lower supply voltage (e.g. 3.3 V). In this case, the pull-up resistor must be connected to the given receiver supply.The IC is produced in BiCMOS technology with high voltage capability, also providing reverse polarity protection. Digital signal processing, using a 16-bit DSP architecture together with digital temperature compensation, guarantees excellent long-time stability as compared to analog compensation methods. While the overall resolution is 16 bits, some internal stages work with resolutions up to 20 bits. The PWM output frequency can be selected within the range of 122 Hz up to 1953 Hz. | Summary of Features: SPC (Short PWM Code) protocol with enhanced interface features based on SENT (Single Edge Nibble Transmission,defined by SAE J2716); 20-bit Digital Signal Processing (DSP); Digital temperature compensation; 16-bit overall resolution; Operates within automotive temperature range; Low drift of output signal over temperature and lifetime; Programmable parameters stored in EEPROM with single-bit error correction: SPC protocol modes: synchronous transmission, dynamic range selection, ID selection mode,SPC unit time,Magnetic range and sensitivity (gain), polarity of the output slope,Offset,Bandwidth,Clamping levels,Customer temperature compensation coefficients,Memory lock Re-programmable until memory lock; Supply voltage 4.5 - 5.5 V (4.1 - 16 V in extended range); Operation between -200 mT and +200 mT within three ranges; Reverse-polarity and overvoltage protection for all pins; Output short-circuit protection; On-board diagnostics (overvoltage, EEPROM error, start up); Output of internal magnetic field values and temperature; Programming and operation of multiple sensors with common power supply; Two-point calibration of magnetic transfer function without iteration steps; High immunity against mechanical stress, EMC, ESD | Target Applications: Robust replacement of potentiometers,No mechanical abrasion,Resistant to humidity, temperature, pollution and vibration; Linear and angular position sensing in automotive applications such as pedal position, suspension control, throttle position, headlight levelling, and steering torque sensing; Sensing of high current for battery management, motor control,and electronic fuses

***et Europe: Hall Effect Sensor 5mA Unipolar/Bipolar 5V 3-Pin SSO Ammo Pack

***ineon SCT: The linear Hall IC TLE4998C has been designed specifically to meet the requirements of highly accurate angle and position detection as well as for current measurement applications, PG-SSO-4, RoHS

***ineon: The linear Hall IC TLE4998C has been designed specifically to meet the requirements of highly accurate angle and position detection as well as for current measurement applications. The sensor provides a digital SPC (Short PWM Code) signal, based on the standardized SENT (Single Edge Nibble Transmission, SAE J2716) protocol. The SPC protocol allows transmissions initiated by the ECU. Two further operation modes are available: range selection for dynamical switching of the measurement range during operation ,ID selection to build a bus system with up to 4 ICs on a single output line and a common supply, which can be individually accessed by the ECU. Each transmission sequence contains an adjustable number of nibbles representing the magnetic field, the temperature value and a status information of the sensor.The output stage is an open-drain driver pulling the output pin to low only. Therefore, the high level needs to be obtained by an external pull-up resistor. This output type has the advantage that the receiver may use an even lower supply voltage (e.g. 3.3 V). In this case the pull-up resistor must be connected to the given receiver supply. The IC is produced in BiCMOS technology with high voltage capability, and it also has reverse-polarity protection. Digital signal processing using a 16-bit DSP architecture together with digital temperature compensation guarantee excellent long-time stability compared to analog compensation methods. While the overall resolution is 16 bits, some internal stages work with resolutions up to 20 bits. | Summary of Features: SPC (Short PWM Code) protocol with enhanced interface features based on SENT (Single Edge Nibble Transmission,defined by SAE J2716); 20-bit Digital Signal Processing (DSP); Digital temperature compensation; 16-bit overall resolution; Operates within automotive temperature range; Low drift of output signal over temperature and lifetime; Programmable parameters stored in EEPROM with single-bit error correction: SPC protocol modes: synchronous transmission, dynamic range selection, ID selection mode,SPC unit time,Magnetic range and sensitivity (gain), polarity of the output slope,Offset,Bandwidth,Clamping levels,Customer temperature compensation coefficients,Memory lock Re-programmable until memory lock; Supply voltage 4.5 - 5.5 V (4.1 - 16 V in extended range); Operation between -200 mT and +200 mT within three ranges; Reverse-polarity and overvoltage protection for all pins; Output short-circuit protection; On-board diagnostics (overvoltage, EEPROM error, start up); Output of internal magnetic field values and temperature; Programming and operation of multiple sensors with common power supply; Two-point calibration of magnetic transfer function without iteration steps; High immunity against mechanical stress, EMC, ESD | Target Applications: Robust replacement of potentiometers,No mechanical abrasion,Resistant to humidity, temperature, pollution and vibration; Linear and angular position sensing in automotive applications such as pedal position, suspension control, throttle position, headlight levelling, and steering torque sensing; Sensing of high current for battery management, motor control,and electronic fuses

***et: Hall Effect Sensor 5mA Unipolar|Bipolar 5V 3-Pin SSO Ammo Pack

***et Europe: Board Mount Hall Effect / Magnetic Sensors Programmable Linear Hall Sensor

***ineon SCT: The linear Hall IC TLE4998S3C has been designed specifically to meet the requirements of highly accurate rotation and position detection, as well as for current measurement applications, PG-SSO-3, RoHS

***ineon: The linear Hall IC TLE4998S3C has been designed specifically to meet the requirements of highly accurate rotation and position detection, as well as for current measurement applications. Two capacitors are integrated on the lead frame, making this sensor especially suitable for demanding EMC requirements .The sensor provides a digital PWM signal, which is ideally suited for direct decoding by any unit measuring a duty cycle of a rectangular signal (usually a timer/capture unit in a microcontroller). Furthermore, it is possible to attach an external lowpass filter, which allows an A/D conversion using the sensor supply voltage as a reference. The output stage is an open-drain driver pulling the output pad to low only. Therefore, the high level must be obtained by an external pull-up resistor. This output type has the advantage that the receiver may use even a lower supply voltage (e.g. 3.3 V). In this case, the pull-up resistor must be connected to the given receiver supply.The IC is produced in BiCMOS technology with high voltage capability, also providing reverse polarity protection. Digital signal processing, using a 16-bit DSP architecture together with digital temperature compensation, guarantees excellent long-time stability as compared to analog compensation methods. While the overall resolution is 16 bits, some internal stages work with resolutions up to 20 bits. | Summary of Features: SPC (Short PWM Code) protocol with enhanced interface features based on SENT (Single Edge Nibble Transmission,defined by SAE J2716); 20-bit Digital Signal Processing (DSP); Digital temperature compensation; 16-bit overall resolution; Operates within automotive temperature range; Low drift of output signal over temperature and lifetime; Programmable parameters stored in EEPROM with single-bit error correction: SPC protocol modes: synchronous transmission, dynamic range selection, ID selection mode,SPC unit time,Magnetic range and sensitivity (gain), polarity of the output slope,Offset,Bandwidth,Clamping levels,Customer temperature compensation coefficients,Memory lock Re-programmable until memory lock; Supply voltage 4.5 - 5.5 V (4.1 - 16 V in extended range); Operation between -200 mT and +200 mT within three ranges; Reverse-polarity and overvoltage protection for all pins; Output short-circuit protection; On-board diagnostics (overvoltage, EEPROM error, start up); Output of internal magnetic field values and temperature; Programming and operation of multiple sensors with common power supply; Two-point calibration of magnetic transfer function without iteration steps; High immunity against mechanical stress, EMC, ESD; Package with two capacitors:47nF(VDD to GND) and 4.7nF(OUT to GND) | Target Applications: Robust replacement of potentiometers,No mechanical abrasion,Resistant to humidity, temperature, pollution and vibration; Linear and angular position sensing in automotive applications such as pedal position, suspension control, throttle position, headlight levelling, and steering torque sensing; Sensing of high current for battery management, motor control,and electronic fuses

***p One Stop Global: Hall Effect Sensor 5mA Bipolar Latch 5V/9V/12V/15V/18V 4-Pin(3+Tab) SOT-89B T/R

***(Formerly Allied Electronics): Sensor; Speed and Direction Hall Effect; Digital Sensor; SOT-89B Surface Mount

***ource: Bipolar Latch, Dual Hall-effect Digital Position Sensor with Speer and Direction Outputs

***er Electronics: Board Mount Hall Effect / Magnetic Sensors SOT-89B 3.4 Vdc to 24 Vdc

***ell Electronics: Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package)

***ark: Hall-Effect Digital Position Sensor; Hall Effect Type:Bipolar; Output Current:5mA; Sensor Case Style:SOT-89B; No. of Pins:4; Operating Temperature Range:-40°C to +125°C; Bandwidth:1000Hz; Operate Point Typ:130G

***eywell: The Speed & Direction Hall effect sensor has two distinct Hall sensing elements precisely located 1.4 mm apart on a single integrated circuit chip, which is then encapsulated in a thermoset molding material. Two active Hall latches provide indication of the speed and direction of a magnetic gradient across the face of the package, such as the gradient from a rotating ring magnet. The small, 4-pin SOT89 style package surface mounts on PC boards and flexible circuits. Built-in temperature compensation is optimized to match the temperature coefficient of low cost magnets and track their performance over temperature. Latching magnetics are standard for reliable operation. A unique regulator circuit provides extremely stable operation with supply voltages as low as 3.4 Vdc and as high as 24 Vdc. A typical room temperature current consumption of 7.5 mA helps conserve power in battery operation. SS520 series sensors can use existing power supply sources in most applications, and can be directly interfaced with many electronic components without buffering or compensation circuitry. CAUTION: WAVE SOLDER DAMAGE do not wave solder this product. Wave soldering may negatively affect the sensor performance and reliability. Subjecting the sensor to wave soldering will void Honeywell's warranty. Failure to comply with these instructions may result in product damage. NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic field of sufficient strength is present, the sensor output will be in the condition dictated by the magnetic field.

***er Electronics: Board Mount Hall Effect / Magnetic Sensors SOT-23 SMT 2.7 TO 7Vdc

***ical: Hall Effect Sensor 4mA Unipolar 5V 3-Pin SOT-23 T/R

*** Electronics: HONEYWELL S&C SS345PT HALL EFFECT SENSOR UNIPOLAR, SOT23-3

***nell: HALL EFFECT SENSOR UNIPOLAR, SOT23-3, FULL REEL; Hall Effect Type: Unipolar; Output Current: 4mA; Sensor Case Style: SOT-23; No. of Pins: 3Pins; Supply Voltage Min: 2.7V; Supply Voltage Max: 7V; Operating Temperature Min: -40°C; MSL: -

***eywell: SS345PT Hall-effect digital position sensor IC with built-in pull-up resistor, unipolar, high sensitivity, SOT-23, pocket tape and reel, 3000 units/reel The SS345PT/SS445P sensor ICs are small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, designed to respond to a single North pole (SS345PT) or South pole (SS445P). These unipolar sensors are designed to meet the requirements of a wide range of potential applications. The internal pull-up resistor often eliminates the need for external components, further helping to reduce the system cost. These economical unipolar sensors are well suited for simple, high-volume, cost-sensitive position and motion sensing applications. The 2.7 Vdc to 7 Vdc supply voltage range allows this device to be used in low voltage applications. The SS345PT’s very small size requires less PCB (printed circuit board) space, allowing it to be used in smaller assemblies. These sensors are available in two package styles: the SS345PT in the subminiature SOT-23 surface mount package; the SS445P is available in the leaded, flat TO-92-style package. The SS345PT is available on tape and reel (3000 units per reel); the SS445P is available in a bulk package (1000 units per bag).

***et Europe: Hall Effect Sensor 5mA Unipolar/Bipolar 5V 3-Pin SSO Ammo Pack

***ure Electronics: TLE4998P3 Series 5.5 V 8 mA Programmable Linear Hall Sensor - PG-SSO-3-10

***S.I.T. Europe - USA - Asia: Hall Effect Sensor, 50mT Min, 200mT Max, BICMOS, Plastic/epoxy, Square, 3 Pin, Through Hole Mount

***nell: HALL EFFECT SENSOR, LINEAR, SSO-3; Hall Effect Type: Linear; Output Current: 5A; Sensor Case Style: SSO; No. of Pins: 3Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; Operating Temperature Min: -40°C; Operating Temper

***ineon: The linear Hall IC TLE4998P has been designed specifically to meet the requirements of highly accurate rotation and position detection, as well as for current measurement applications. The sensor provides a digital PWM signal, which is ideally suited for direct decoding by any unit measuring a duty cycle of a rectangular signal (usually a timer/capture unit in a microcontroller). Furthermore, it is possible to attach an external lowpass filter, which allows an A/D conversion using the sensor supply voltage as a reference. The output stage is an open-drain driver pulling the output pad to low only. Therefore, the high level must be obtained by an external pull-up resistor. This output type has the advantage that the receiver may use even a lower supply voltage (e.g. 3.3 V). In this case, the pull-up resistor must be connected to the given receiver supply.The IC is produced in BiCMOS technology with high voltage capability, also providing reverse polarity protection. Digital signal processing, using a 16-bit DSP architecture together with digital temperature compensation, guarantees excellent long-time stability as compared to analog compensation methods. While the overall resolution is 16 bits, some internal stages work with resolutions up to 20 bits. The PWM output frequency can be selected within the range of 122 Hz up to 1953 Hz. | Summary of Features: SPC (Short PWM Code) protocol with enhanced interface features based on SENT (Single Edge Nibble Transmission,defined by SAE J2716); 20-bit Digital Signal Processing (DSP); Digital temperature compensation; 16-bit overall resolution; Operates within automotive temperature range; Low drift of output signal over temperature and lifetime; Programmable parameters stored in EEPROM with single-bit error correction: SPC protocol modes: synchronous transmission, dynamic range selection, ID selection mode,SPC unit time,Magnetic range and sensitivity (gain), polarity of the output slope,Offset,Bandwidth,Clamping levels,Customer temperature compensation coefficients,Memory lock Re-programmable until memory lock; Supply voltage 4.5 - 5.5 V (4.1 - 16 V in extended range); Operation between -200 mT and +200 mT within three ranges; Reverse-polarity and overvoltage protection for all pins; Output short-circuit protection; On-board diagnostics (overvoltage, EEPROM error, start up); Output of internal magnetic field values and temperature; Programming and operation of multiple sensors with common power supply; Two-point calibration of magnetic transfer function without iteration steps; High immunity against mechanical stress, EMC, ESD | Target Applications: Robust replacement of potentiometers,No mechanical abrasion,Resistant to humidity, temperature, pollution and vibration; Linear and angular position sensing in automotive applications such as pedal position, suspension control, throttle position, headlight levelling, and steering torque sensing; Sensing of high current for battery management, motor control,and electronic fuses

***ponent Stockers USA: MAGNETIC FIELD SENSOR-HALL EFFECT 5mT 2.10-2.90V SQUARE THROUGH HOLE MOUNT

***er Electronics: Board Mount Hall Effect / Magnetic Sensors HALL EFFECT SENSOR

***Electronics SCT: Ratiometric linear Hall-Effect sensor, Supply Current 6 mA, Output Type: Logic level, TO-92-3, RoHS

***(Formerly Allied Electronics): Sensor; Hall Effect; Linear; 5V; Through Hole; 5 mA

Market price

Part #	Mfg.	Description	Stock	Price
TLE4998P4HALA1 DISTI # V36:1790_06377004	Infineon Technologies AG	Hall Effect Sensor 5mA 5V Automotive 4-Pin SSO Ammo RoHS: Compliant	0	2000000:$1.9370 1000000:$1.9400 200000:$2.1910 20000:$2.6360 2000:$2.7100
TLE4998P4HALA1 DISTI # TLE4998P4HALA1TB-ND	Infineon Technologies AG	SENSOR HALL EFFECT PWM SSO4 RoHS: Compliant Min Qty: 2000 Container: Tape & Box (TB)	Temporarily Out of Stock	2000:$2.3175
TLE4998P4 DISTI # TLE4998P4	Infineon Technologies AG	Hall Effect Sensor 5mA Unipolar/Bipolar 5V 4-Pin SSO Ammo Pack - Bulk (Alt: TLE4998P4) RoHS: Not Compliant Min Qty: 160 Container: Bulk	Americas - 0	800:$1.9900 1600:$1.9900 480:$2.0900 320:$2.1900 160:$2.2900
TLE4998P4 DISTI # SP000412106	Infineon Technologies AG	Hall Effect Sensor 5mA Unipolar/Bipolar 5V 4-Pin SSO Ammo Pack (Alt: SP000412106) RoHS: Compliant Min Qty: 1 Container: Ammo Pack	Europe - 0	50:€1.8900 100:€1.8900 500:€1.8900 1000:€1.8900 1:€2.0900 10:€2.0900 25:€2.0900
TLE4998P4XA DISTI # TLE4998P4HALA1	Infineon Technologies AG	Hall Effect Sensor 5mA Unipolar\|Bipolar 5V 4-Pin SSO - Ammo Pack (Alt: TLE4998P4HALA1) RoHS: Compliant Min Qty: 2000 Container: Ammo Pack	Americas - 0	12000:$1.9900 20000:$1.9900 8000:$2.0900 4000:$2.1900 2000:$2.2900
TLE4998P4 DISTI # 726-TLE4998P4	Infineon Technologies AG	Board Mount Hall Effect / Magnetic Sensors HALL SENSOR 4.5-5.5V PWM OPEN DRAIN RoHS: Compliant	0	1:$4.2300 10:$3.5900 100:$3.1100 250:$2.9500 500:$2.6500 1000:$2.2300 2000:$2.1200
TLE4998P4	Infineon Technologies AG	Hall Effect Sensor, 50mT Min, 200mT Max, 0.30-0.60V, BICMOS, Plastic/epoxy, Rectangular, 4 Pin, Through Hole Mount RoHS: Compliant	1899	1000:$2.1100 500:$2.2200 100:$2.3100 25:$2.4100 1:$2.5900
TLE4998P4HALA1	Infineon Technologies AG	Hall Effect Sensor, 50mT Min, 200mT Max, 0.30-0.60V, Rectangular, Through Hole Mount RoHS: Compliant	648	1000:$2.0700 500:$2.1800 100:$2.2600 25:$2.3600 1:$2.5400

Image	Part #	Description
	Mfr.#: TLE4998S8XUMA1 OMO.#: OMO-TLE4998S8XUMA1	Board Mount Hall Effect / Magnetic Sensors
	Mfr.#: TLE4998P8DXUMA1 OMO.#: OMO-TLE4998P8DXUMA1-INFINEON-TECHNOLOGIES	Magnetic Sensors Board Mount Hall Effect / Magnetic Sensors POSITION&CURRENT SENSORS
	Mfr.#: TLE4998S4 OMO.#: OMO-TLE4998S4-449	Magnetic Sensors Board Mount Hall Effect / Magnetic Sensors HALL SENSOR 4.5-5.5V SENT OPEN DRAIN
	Mfr.#: TLE4998S3 OMO.#: OMO-TLE4998S3-449	Magnetic Sensors Board Mount Hall Effect / Magnetic Sensors HALL SENSOR 4.5-5.5V SENT OPEN DRAIN
	Mfr.#: TLE4998C3C OMO.#: OMO-TLE4998C3C-449	Magnetic Sensors Board Mount Hall Effect / Magnetic Sensors Programmable Linear Hall Senso
	Mfr.#: TLE4998P4 OMO.#: OMO-TLE4998P4-449	Magnetic Sensors Board Mount Hall Effect / Magnetic Sensors HALL SENSOR 4.5-5.5V PWM OPEN DRAIN
	Mfr.#: TLE4998P4HALA1 OMO.#: OMO-TLE4998P4HALA1-INFINEON-TECHNOLOGIES	SENSOR HALL EFFECT PWM SSO4
	Mfr.#: TLE4998P4XA OMO.#: OMO-TLE4998P4XA-1190	Hall Effect Sensor 5mA Unipolar\|Bipolar 5V 4-Pin SSO - Ammo Pack (Alt: TLE4998P4HALA1)
	Mfr.#: TLE4998C4XA OMO.#: OMO-TLE4998C4XA-1190	Hall Effect Sensor 5mA Unipolar\|Bipolar 5V 3-Pin SSO Ammo Pack - Ammo Pack (Alt: TLE4998C4HALA1)
	Mfr.#: TLE4998C8XUMA2 OMO.#: OMO-TLE4998C8XUMA2-INFINEON-TECHNOLOGIES	IC HALL SENSOR LINEAR TDSO-8

TLE4998P4HALA1

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes