LM3279TLE/NOPB

Mfr. #:: LM3279TLE/NOPB
Description:: Switching Voltage Regulators Buck-Boost Cnvtr w/ MIPI RFFE IF
Lifecycle:: New from this manufacturer.
Datasheet:: LM3279TLE/NOPB Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
More Information:: LM3279TLE/NOPB more Information LM3279TLE/NOPB Product Details

Product Attribute
Attribute Value

Manufacturer:: Texas Instruments

Product Category:: Switching Voltage Regulators

RoHS:: Y

Mounting Style:: SMD/SMT

Package / Case:: DSBGA-16

Topology:: Boost, Buck

Minimum Operating Temperature:: - 30 C

Maximum Operating Temperature:: + 85 C

Series:: LM3279

Packaging:: Reel

Operating Temperature Range:: - 30 C to + 85 C

Type:: Voltage Converter

Brand:: Texas Instruments

Product Type:: Switching Voltage Regulators

Factory Pack Quantity:: 250

Subcategory:: PMIC - Power Management ICs

Unit Weight:: 0.000208 oz

Tags: LM3279T, LM327, LM32, LM3

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

LM3279TLE/NOPB Description

***ical: Conv DC-DC 2.7V to 5.5V Step Down/Step Up Single-Out 0.4V to 4.212V 1A 16-Pin DSBGA T/R

*** Stop Electro: Switching Regulator, Current-mode, 1A, 2700kHz Switching Freq-Max, PBGA16

***as Instruments: Buck-Boost Converter with MIPI® RFFE Interface for 3G and 4G RF Power Amplifiers 16-DSBGA -30 to 85

***sener Electronics: IC BUCK BOOST CONV MIPI 16DSBGA

***el Electronic: IC REG LINEAR 5V 250MA TO220-7

***sible Micro: IC CNV 3279 DC-DC RFFE DSBGA16

***as Instruments: 1A, High Efficiency Dual Mode Single Inductor Buck-Boost DC/DC Converter 12-WSON

*** Stop Electro: Switching Regulator/Controller, Voltage-mode, 2500kHz Switching Freq-Max, PDSO12

***p One Stop: Conv DC-DC 2.5V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 2.8V/3.3V 1A 12-Pin WSON EP T/R

***nell: DC/DC, DUAL, 3.3V, 1A, 12LLP; Topologie: Buck-Boost Synchrone; Tension, entrée min.: 2.8V; Tension, entrée max..: 5.5V; Nombre de canaux de sortie: 1Sortie(s); Boîtier de convertisseur DC / DC: WSON; Nombre de broches: 12Broch

***ment14 APAC: IC, DC-DC CONV, LLP-12; Primary Input Voltage:5.5V; No. of Outputs:2; Output Voltage:3.3V; Output Current:1A; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; MSL:MSL 1 - Unlimited; Leaded Process Compatible:Yes

***as Instruments: 1A, High Efficiency Dual Mode Single Inductor Buck-Boost DC/DC Converter 12-WSON -40 to 85

*** Stop Electro: Switching Regulator/Controller, Voltage-mode, 2500kHz Switching Freq-Max, PDSO12

***p One Stop: Conv DC-DC Single Non-Inv/Inv/Step Up/Step Down 2.5V to 5.5V 12-Pin WSON EP T/R

***nell: DC-DC CONV, BUCK/BOOST, 2.2MHZ, WSON-12; Topologie: Buck-Boost Synchrone; Tension, entrée min.: 3.9V; Tension, entrée max..: 5.5V; Nombre de canaux de sortie: 1Sortie(s); Boîtier de convertisseur DC / DC: WSON; Nombre de broc

***ark: IC, DC-DC CONV; Primary Input Voltage:5.5V; No. of Outputs:1; Output Voltage:5V; Output Current:1A; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; MSL:MSL 1 - Unlimited; Leaded Process Compatible:Yes ;RoHS Compliant: Yes

***as Instruments: 1A, High Efficiency Dual Mode Single Inductor Buck-Boost DC/DC Converter 12-WSON -40 to 85

*** Stop Electro: Switching Regulator/Controller, Voltage-mode, 2500kHz Switching Freq-Max, PDSO12

***ow.cn: Conv DC-DC 2.5V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 2.8V/3.3V 1A 12-Pin WSON EP T/R

***sener Electronics: IC REG BUCK BOOST PROG 1A 12WSON

***el Electronic: IC FLASH 256M SPI 133MHZ 24BGA

***inecomponents.com: 1A HIGH EFF, DUAL MODE CONVERT

***i-Key: IC CONV DC/DC 1A B/B HE 12-LLP

***emi: 1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator

***r Electronics: Switching Controller, Voltage-mode, 1.6A, 3350kHz Switching Freq-Max, PBGA12

***rchild Semiconductor: The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.

***ical: Conv DC-DC 2.7V to 5.5V Step Down Single-Out 0.75V to 1.4375V 1.1A 12-Pin WLCSP T/R

***emi: 1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator

***r Electronics: Switching Controller, Voltage-mode, 1.1A, 3350kHz Switching Freq-Max, PBGA12

***rchild Semiconductor: The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.

***r Electronics: Switching Controller, Voltage-mode, 1.8A, 3350kHz Switching Freq-Max, PBGA12

***emi: 1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator

***rchild Semiconductor: The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.

Market price

Part #	Description	Stock	Price
LM3279TLE/NOPB DISTI # V98:2334_07274554	Conv DC-DC 2.7V to 5.5V Step Down/Step Up Single-Out 0.4V to 4.212V 1A 16-Pin DSBGA T/R RoHS: Compliant	390	250:$1.6997 100:$1.7004 25:$2.1063 10:$2.1075 1:$2.4626
LM3279TLE/NOPB DISTI # 296-40184-1-ND	IC BUCK BOOST CONV MIPI 16DSBGA RoHS: Compliant Min Qty: 1 Container: Cut Tape (CT)	1364In Stock	100:$1.8933 10:$2.3560 1:$2.6200
LM3279TLE/NOPB DISTI # 296-40184-6-ND	IC BUCK BOOST CONV MIPI 16DSBGA RoHS: Compliant Min Qty: 1 Container: Digi-Reel®	1364In Stock	100:$1.8933 10:$2.3560 1:$2.6200
LM3279TLE/NOPB DISTI # 296-40184-2-ND	IC BUCK BOOST CONV MIPI 16DSBGA RoHS: Compliant Min Qty: 250 Container: Tape & Reel (TR)	Temporarily Out of Stock	1250:$1.2513 500:$1.5103 250:$1.7260
LM3279TLE/NOPB DISTI # 25825942	Conv DC-DC 2.7V to 5.5V Step Down/Step Up Single-Out 0.4V to 4.212V 1A 16-Pin DSBGA T/R RoHS: Compliant	390	250:$1.6704 100:$1.6717 25:$2.0552 10:$2.0575 6:$2.3898
LM3279TLE/NOPB DISTI # LM3279TLE/NOPB	Conv DC-DC Single Step Up/Down 2.7V to 5.5V 16-Pin DSBGA T/R - Tape and Reel (Alt: LM3279TLE/NOPB) RoHS: Compliant Min Qty: 500 Container: Reel	Americas - 0	500:$1.2519 1000:$1.1909 1500:$1.1519 2500:$1.1129 5000:$1.0819
LM3279TLE/NOPB DISTI # LM3279TLE/NOPB	Conv DC-DC Single Step Up/Down 2.7V to 5.5V 16-Pin DSBGA T/R (Alt: LM3279TLE/NOPB) RoHS: Compliant Min Qty: 250 Container: Tape and Reel	Europe - 0	250:€1.4900 500:€1.4900 1000:€1.4900 1500:€1.4900 2500:€1.4900
LM3279TLE/NOPB DISTI # 595-LM3279TLE/NOPB	Switching Voltage Regulators Buck-Boost Cnvtr w/ MIPI RFFE IF RoHS: Compliant	480	1:$2.5400 10:$2.1600 100:$1.7300 250:$1.7300 500:$1.5200 1000:$1.2600 2500:$1.1700 5000:$1.1300
LM3279TLX/NOPB DISTI # 595-LM3279TLX/NOPB	Switching Voltage Regulators Buck-Boost Cnvtr w/ MIPI RFFE IF RoHS: Compliant	0	3000:$1.0200 6000:$0.9770
LM3279TLE/NOPB DISTI # C1S746203605072	Conv DC-DC 2.7V to 5.5V Step Down/Step Up Single-Out 0.4V to 4.212V 1A 16-Pin DSBGA T/R RoHS: Compliant	390	250:$1.6704 100:$1.6717 25:$2.0552 10:$2.0575 1:$2.3898

Image	Part #	Description
	Mfr.#: TLV320AIC3101IRHBT OMO.#: OMO-TLV320AIC3101IRHBT	Interface - CODECs 6 In & Out Speaker & Headph Amp
	Mfr.#: TS5A12301EYFPR OMO.#: OMO-TS5A12301EYFPR	Analog Switch ICs IEC Lev 4 ESD Prot 0.75Ohm SPDT Ana Sw
	Mfr.#: TXB0104PWR OMO.#: OMO-TXB0104PWR	Translation - Voltage Levels 4-Bit Bi-directional V-Level Translator
	Mfr.#: TPS22963CYZPT OMO.#: OMO-TPS22963CYZPT	Power Switch ICs - Power Distribution Low On-Resistance 3A Load Switch
	Mfr.#: LM3279EVM OMO.#: OMO-LM3279EVM	Power Management IC Development Tools LM3279 Eval Module
	Mfr.#: TLV320AIC3101IRHBT OMO.#: OMO-TLV320AIC3101IRHBT-TEXAS-INSTRUMENTS	Interface - CODECs 6 In & Out Speaker & Headph Amp
	Mfr.#: TXB0104PWR OMO.#: OMO-TXB0104PWR-TEXAS-INSTRUMENTS	Translation - Voltage Levels 4-Bit Bi-directional V-Level Translato
	Mfr.#: LM3279EVM OMO.#: OMO-LM3279EVM-TEXAS-INSTRUMENTS	EVALUATION BOARD FOR LM3279
	Mfr.#: TS5A12301EYFPR OMO.#: OMO-TS5A12301EYFPR-TEXAS-INSTRUMENTS	Analog Switch ICs IEC Lev 4 ESD Prot 0.75Ohm SPDT Ana Sw
	Mfr.#: TPS22963CYZPT OMO.#: OMO-TPS22963CYZPT-TEXAS-INSTRUMENTS	IC LOAD SWITCH ULTRA LOW 6-DSBGA

LM3279TLE/NOPB

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes