TPS40053PWPR

Neat little handkerchief. The power bus is open in the middle, that is, you can use two different power supplies from both ends. In the kit only the dad-dad cables and is not enough mom-mom, because not everything can be stuck in the board, order immediately and such wires. Manufacturing is not very accurate, the pint comb for 40 pins is no longer inserted, there is a shift of pins by half a millimeter (in the photo).A nice small board. There's a lot of power to do in the middle of the board so you can use two different power supplies each from its own side. Badly lacks female-female cables, they are useful for the stuff that you cannot install on the board, so order these cables separately. The precision quality is moderate, 40pin connecter doesn't fit because of the error of 0.5mm at the end (see on the photo).