ADG507AKNZ

Mfr. #:: ADG507AKNZ
Manufacturer:: Analog Devices Inc.
Description:: Multiplexer Switch ICs Dual 8:1 280 Ohm CMOS
Lifecycle:: New from this manufacturer.
Datasheet:: ADG507AKNZ Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:: ADG507AKNZ Datasheet ADG507AKNZ Datasheet (P4-P6)ADG507AKNZ Datasheet (P7-P8)
ECAD Model:
More Information:: ADG507AKNZ more Information ADG507AKNZ Product Details

Product Attribute
Attribute Value

Manufacturer:: Analog Devices Inc.

Product Category:: Multiplexer Switch ICs

RoHS:: Y

Product:: Multiplexers

Number of Channels:: 8 Channel

Configuration:: 2 x 8:1

On Resistance - Max:: 700 Ohms

On Time - Max:: 600 ns

Off Time - Max:: 600 ns

Operating Supply Voltage:: 10.8 V to 16.5 V

Minimum Operating Temperature:: - 55 C

Maximum Operating Temperature:: + 125 C

Mounting Style:: Through Hole

Package / Case:: PDIP-28

Packaging:: Tube

Height:: 5.08 mm

Length:: 36.83 mm

Series:: ADG507A

Width:: 13.97 mm

Brand:: Analog Devices

Off Isolation - Typ:: 68 dB

Pd - Power Dissipation:: 470 mW

Product Type:: Multiplexer Switch ICs

Propagation Delay Time:: 300 ns

Factory Pack Quantity:: 13

Subcategory:: Switch ICs

Unit Weight:: 0.147798 oz

Tags: ADG507AKN, ADG507AK, ADG507A, ADG507, ADG50, ADG5, ADG

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

ADG507AKNZ Description

***eco: Analog Multiplexer Dual 8:1 ±16.5 Volt 16.5 Volt 28-Pin Plastic DIP W

***el Electronic: PowerPC e300c3 Microprocessor IC MPC83xx 1 Core, 32-Bit 400MHz 620-PBGA (29x29)

***ical: Analog Multiplexer Single 8:1 Automotive 28-Pin PDIP W Tube

***ark: Multiplexer, Cmos Analogue, Wdip; Multiplexer Configuration:8:1; No. Of Circuits:2Circuits; On State Resistance Max:700Ohm; Supply Voltage Range:10.8V To 16.5V, ± 10.8V To ± 16.5V; Analogue Multiplexer Case:wdip; No. Of Pins:28Pins Rohs Compliant: Yes

***eco: Analog Multiplexer Single 16:1 ±16.5 Volt 16.5 Volt 28-Pin Plastic DIP W

***log Devices: CMOS Latched ± 15 V 16 Channel Analog Multiplexer

*** Electronic Components: Multiplexer Switch ICs 16:1 CMOS Latched

***i-Key Marketplace: SINGLE-ENDED MULTIPLEXER, 16 CHA

***el Electronic: IC, MUX 16CH SP LATCHED, DIP28, 526

***(Formerly Allied Electronics): IC MUX ANALOG SINGLE 16CH 28DIP

***ark: Multiplexer, Analogue, Dip; Multiplexer Configuration:16:1; No. Of Circuits:1Circuits; On State Resistance Max:700Ohm; Supply Voltage Range:10.8V To 16.5V, ± 10.8V To ± 16.5V; Analogue Multiplexer Case:dip; No. Of Pins:28Pins Rohs Compliant: Yes

***swan: IC MULTIPLEXER DUAL 8X1 28DIP

***or: DIFFERENTIAL MUX,8 CHANNEL

***log Devices: NEW DESIGNS consider ADG1407 The ADG406, ADG407, and ADG426 are monolithic CMOS analog multiplexers. The ADG406 and ADG426 switch one of sixteen inputs to a common output as determined by the 4-bit binary address lines: A0, A1, A2, and A3. The ADG426 has on-chip address and control latches that facilitate microprocessor interfacing. The ADG407 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on all devices is used to enable or disable the device. When disabled, all channels are switched off. The ADG406/ADG407/ADG426 are designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. These features make the parts suitable for high speed data acquisition systems and audio signal switching. Low power dissipation makes the parts suitable for battery powered systems. Each channel conducts equally well in both directions when on and has an input signal range which extends to the supplies. In the off condition, signal levels up to the supplies are blocked. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.

***et Europe: Analog Multiplexer Single 16:1 28-Pin PDIP W Tube

*** Electronic Components: Multiplexer Switch ICs 16:1 CMOS Latched

***ource: CMOS LATCHED 8/16 CHANNEL ANALOG MULTIPLEXERS

***eco: IC,ADG526AKN,16 CHANNEL LATCHA BLE MUX

***log Devices: The ADG526A and ADG527A are CMOS monolithic analog multiplexers with 16 single channels and dual 8 channels, respectively. On-chip latches facilitate microprocessor interfacing. The ADG526A switches one of 16 inputs to a common output, depending on the state of four binary addresses and an enable input. The ADG527A switches one of eight differential inputs to a common differential output, depending on the state of three binary addresses and an enable input. Both devices have TTL and 5 V CMOS logic-compatible digital inputs. The ADG526A and ADG527A are designed on an enhanced LC2MOS process that gives an increased signal capability of VSS to VDD and enables operation over a wide range of supply voltages. The devices can comfortably operate anywhere in the 10.8 V to 16.5 V single- or dual-supply range. These multiplexers also feature high switching speeds and low RON. Applications Data acquisition systems Communication systems Automatic test equipment Microprocessor controlled systems

*** Electronics: ANALOG DEVICES - ADG406BNZ - 16:1 Analog Multiplexer IC, Single, 50 ohm, 10.8V to 13.2V, DIP-28

***eco: Analog Multiplexer Single 16:1 ±22 Volt 25 Volt 28-Pin Plastic DIP W

***S.I.T. Europe - USA - Asia: Single-Ended Multiplexer, 1 Func, 16 Channel, BICMOS, PDIP28

***log Devices: LC2MOS ± 15V 16 Channel High Performance Analog Multiplexer

***ark: Multiplexer, Analogue, Wdip; Multiplexer Configuration:16:1; No. Of Circuits:1Circuits; On State Resistance Max:125Ohm; Supply Voltage Range:10.8V To 13.2V, ± 13.5V To ± 16.5V; Analogue Multiplexer Case:wdip; No. Of Pins:28Pins Rohs Compliant: Yes

***swan: IC MULTIPLEXER 16X1 28DIP

***ark: Multiplexer IC; No. of Pins:28; Leaded Process Compatible:No; Package/Case:28-DIP; Peak Reflow Compatible (260 C):No; Analog Multiplexer Type:Differential; Mounting Type:Through Hole; No. of Channels:16 ;RoHS Compliant: No

***log Devices: The ADG406, ADG407, and ADG426 are monolithic CMOS analog multiplexers. The ADG406 and ADG426 switch one of sixteen inputs to a common output as determined by the 4-bit binary address lines: A0, A1, A2, and A3. The ADG426 has on-chip address and control latches that facilitate microprocessor interfacing. The ADG407 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on all devices is used to enable or disable the device. When disabled, all channels are switched off. The ADG406/ADG407/ADG426 are designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. These features make the parts suitable for high speed data acquisition systems and audio signal switching. Low power dissipation makes the parts suitable for battery powered systems. Each channel conducts equally well in both directions when on and has an input signal range which extends to the supplies. In the off condition, signal levels up to the supplies are blocked. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.

***et: Analog Multiplexer Single 16:1 28-Pin PDIP W Tube

*** Electronic Components: Multiplexer Switch ICs 16:1 50 Ohm LC2MOS High Performance

***log Devices: The ADG406, ADG407, and ADG426 are monolithic CMOS analog multiplexers. The ADG406 and ADG426 switch one of sixteen inputs to a common output as determined by the 4-bit binary address lines: A0, A1, A2, and A3. The ADG426 has on-chip address and control latches that facilitate microprocessor interfacing. The ADG407 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on all devices is used to enable or disable the device. When disabled, all channels are switched off. The ADG406/ADG407/ADG426 are designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. These features make the parts suitable for high speed data acquisition systems and audio signal switching. Low power dissipation makes the parts suitable for battery powered systems. Each channel conducts equally well in both directions when on and has an input signal range which extends to the supplies. In the off condition, signal levels up to the supplies are blocked. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.

ADG507AKNZ More Information

Analog Switches & Multiplexers: Analog Devices Analog Switches and Multiplexers offer a comprehensive range of devices covering single to multiple switch elements. These switches and multiplexers come with various signal ranges in a variety of packages to suit different application needs. The analog switches and multiplexers are used in a wide and growing range of applications from industrial and instrumentation to medical, consumer, communications, and automotive systems.

Switches & Multiplexers: Analog Devices Switches & Multiplexers offer a comprehensive portfolio of switches and multiplexers covering single to multiple switch elements. These switch elements come with various signal ranges in a variety of packages to best suit application needs. The ADI switches and multiplexers are used in a wide and growing range of applications from industrial and instrumentation to medical, consumer, communications, and automotive systems.

Switches & Multiplexers ADI SLP

Market price

Part #	Mfg.	Description	Stock	Price
ADG507AKNZ DISTI # V99:2348_06218978	Analog Devices Inc	Analog Multiplexer Single 8:1 Automotive 28-Pin PDIP W Tube RoHS: Compliant	28	1000:$7.7990 500:$7.8690 250:$8.3699 100:$9.0370 50:$9.9720 25:$10.3870 10:$11.0500 1:$12.0900
ADG507AKNZ DISTI # ADG507AKNZ-ND	Analog Devices Inc	IC MULTIPLEXER DUAL 8X1 28DIP RoHS: Compliant Min Qty: 1 Container: Tube	543In Stock	507:$9.1785 104:$10.3179 13:$12.2169 1:$13.2900
ADG507AKNZ DISTI # 27135238	Analog Devices Inc	Analog Multiplexer Single 8:1 Automotive 28-Pin PDIP W Tube RoHS: Compliant	28	25:$10.3870 10:$11.0500 1:$12.0900
ADG507AKNZ DISTI # 59K1355	Analog Devices Inc	ANALOG MULTIPLEXER, DUAL 8X1, DIP-28,Multiplexer Configuration:8:1,No. of Circuits:2Circuits,On State Resistance Max:280ohm,Supply Voltage Range:10.8V to 16.5V,Analogue Multiplexer Case:DIP,No. of Pins:28Pins RoHS Compliant: Yes	4	1:$13.2900 10:$12.0600 25:$11.3300 50:$10.9200 100:$9.8200 250:$9.0700 500:$8.5300
ADG507AKNZ	Analog Devices Inc	Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDIP28 RoHS: Compliant	1	1000:$11.5100 500:$12.1200 100:$12.6200 25:$13.1600 1:$14.1700
ADG507AKNZ DISTI # 584-ADG507AKNZ	Analog Devices Inc	Multiplexer Switch ICs Dual 8:1 280 Ohm CMOS RoHS: Compliant	76	1:$13.2900 10:$12.0600 25:$11.3300 50:$10.9200 100:$9.8200 250:$9.0700 500:$8.5300 1000:$7.7600
ADG507AKNZ DISTI # 5229622P	Analog Devices Inc	8:1 DIFF ANALOGUE MUXADG507AKN DIP28, TU	74	10:£9.2400 50:£8.5000 100:£7.8200 250:£7.1900
ADG507AKNZ DISTI # 5229622	Analog Devices Inc	8:1 DIFF ANALOGUE MUXADG507AKN DIP28, EA	58	1:£9.7200 10:£9.2400 50:£8.5000 100:£7.8200 250:£7.1900
ADG507AKNZ DISTI # 9604960	Analog Devices Inc	IC, MUX 8CH DP, DIP28, 507 RoHS: Compliant	57	1:$21.0400 10:$19.0800 25:$17.9300 50:$17.2900 100:$15.5400 250:$14.3600 500:$13.5000 1000:$12.8500
ADG507AKNZ DISTI # 9604960	Analog Devices Inc	IC, MUX 8CH DP, DIP28, 507 RoHS: Compliant	30	1:£10.7500 10:£9.2900 25:£8.7300 50:£8.4200 100:£7.4400

Image	Part #	Description
	Mfr.#: PGA202KP OMO.#: OMO-PGA202KP	Instrumentation Amplifiers Digitally Controlled Programmable-Gain
	Mfr.#: 1.5KE7.5CA-E3/54 OMO.#: OMO-1-5KE7-5CA-E3-54	TVS Diodes / ESD Suppressors 1500W 7.5V Bidirect
	Mfr.#: SN75176BP OMO.#: OMO-SN75176BP	RS-422/RS-485 Interface IC Bus Diff
	Mfr.#: ATMEGA16-16PU OMO.#: OMO-ATMEGA16-16PU	8-bit Microcontrollers - MCU 16kB Flash 0.5kB EEPROM 32 I/O Pins
	Mfr.#: 174552-1 OMO.#: OMO-174552-1	Pin & Socket Connectors 4P R/A HEADER
	Mfr.#: 78F100J-RC OMO.#: OMO-78F100J-RC	Fixed Inductors 10uH 5%
	Mfr.#: 1757158 OMO.#: OMO-1757158-PHOENIX-CONTACT	Conn Terminal Block F 16 POS 5.08mm Screw RA Cable Mount 12A
	Mfr.#: 174552-1 OMO.#: OMO-174552-1-TE-CONNECTIVITY	Pin & Socket Connectors 4P R/A HEADER
	Mfr.#: SN75176BP OMO.#: OMO-SN75176BP-TEXAS-INSTRUMENTS	RS-485 Interface IC Bus Diff
	Mfr.#: 0251.500MAT1L OMO.#: OMO-0251-500MAT1L-LITTELFUSE	Fuses with Leads (Through Hole) 125V .5A

ADG507AKNZ

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes