1CPSA8

Mfr. #:: 1CPSA8
Manufacturer:: Honeywell Sensing and Productivity Solutions
Description:: Control Switches 4NC Opening, 1/2NPT Cable Pull Safety SW
Lifecycle:: New from this manufacturer.
Datasheet:: 1CPSA8 Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

Product Attribute
Attribute Value

Manufacturer:: Honeywell

Product Category:: Control Switches

RoHS:: Y

Illuminated:: Non-Illuminated

Lamp Type:: -

Control Type:: Cable Pull Safety Switch

Contact Form:: DP4T

Actuator:: Cable

Brand:: Honeywell

Actuator Style:: Cable

Product Type:: Control Switches

Factory Pack Quantity:: 1

Subcategory:: Switches

Tags: 1CPSA, 1CPS, 1CP

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

1CPSA8 Description

***MP: Cable Pull Switch Pull Ring Manual Reset 250V AC 60V DC 50mA

***o: HONEYWELL MICRO SWITCH 1CPSA8 Cable Pull Switch, 10A, Single, 4NC. More details: Emergency Cable Pull Switch, Switch Function Maintained, Contact Form 4NC, Mounting Style Single End, Indicator No, Rotary Knob Reset, Max. Cable Span 250 ft., Length 10.62 In., Width 3.90 In., Depth 2.57 In., Switching Ability Single Cable, AC Contact Rating 10A, DC Contact Rating 2.5A, Min. Current 10 uA to 50 mA Low Energy, Operating Force 3 to 5 lb., Case Material Zinc Die Cast, Wiring Entry 1/2 In. NPT, NEMA Rating 1, 4, 12, 13, IP Rating 67, For Use With Microswitch CPS Accessories

***eywell: The 1CPS Cable Pull Safety Switch is intended for use in applications with the cable runs up to 76 m [250 ft], such as conveyor runs within defined system zones. It is a cost-effective means of providing this emergency stop signal compared to multiple emergency stop push buttons. (Cable Pull Safety Switches are not, however, to be used as a means of personnel safeguarding. They may be used to prevent further injury or damage to equipment when used for emergency stop signaling.) The 1CPS Series Cable Pull Safety Switch is designed to provide emergency stop protection for exposed conveyor lines. The internal mechanism latches on both slackened cable (push) and pulled cable. This capability enhances productivity by eliminating nuisance stops due to variations in temperature, stretch of cable over time, and other application variables. A line in the midpoint of the cable tension window indicates proper cable tension, providing easy and intuitive set-up. The direct acting switch contacts are held closed when the actuating cable is under proper tension and the reset knob is set to RUN. When the actuating cable is pulled, slackened or broken, a cam positively opens the NC (Normally Closed) switch contacts. The snap action, trip operation causes the switch contacts to change state and mechanically latch almost simultaneously when the cable is pulled, slackened or broken. The NC switch contacts remain open until the 1CPS is reset by properly tensioning the cable and manually rotating the reset knob. When the direct acting switch contacts open, the auxiliary contacts also actuate (open contacts close and closed contacts open). The auxiliary contacts are electrically isolated from the direct acting switch contacts. These NO (Normally Open) contacts may be used for monitoring or signaling. The 1CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN60947-1; IEC/EN60947-5-1; IEC/

***ark: Safety Limit Switch-Cable Pull / Honeywell Rohs Compliant: Yes

***nell: CABLE PULL SAFETY SW, DPST, 250VAC/60VDC; Cable Span: 152m; Contact Configuration: DPST-NO, DPST-NC; Contact Voltage AC Max: 250V; Contact Current AC Max: 50mA; Contact Voltage DC Max: 60V; Contact Current DC Max: 50mA

***eywell: MICRO SWITCH 2CPS Series Cable Pull Safety Switch, Cable, Maintained Both Sides, 2NC/2NO Direct Opening (Switch 2, Left: 1NC/1NO; Switch 2, Right: 1NC/1NO), 1/2 NPT, Gold-plated Contacts, 120 Vac Multi-cluster LED The 2CPS Cable Pull Safety Switch provides readily accessible emergency stop over a long, linear distance. It is a cost-effective means of providing this emergency stop signal compared to multiple emergency stop push buttons. (Cable Pull Safety Switches are not, however, to be used as a means of personnel safeguarding. They may be used to prevent further injury or damage to equipment when used for emergency stop signaling.) The 2CPS Series Cable Pull Safety Switch is designed to provide emergency stop protection for exposed conveyor lines. The internal mechanism latches on both slackened cable (push) and pulled cable. This capability enhances productivity by eliminating nuisance stops due to variations in temperature, stretch of cable over time, and other application variables. A line in the midpoint of the cable tension window indicates proper cable tension, providing easy and intuitive set-up. The direct acting switch contacts are held closed when the actuating cable is under proper tension and the reset knob is set to RUN. When the actuating cable is pulled, slackened or broken, a cam positively opens the NC (Normally Closed) switch contacts. The snap action, trip operation causes the switch contacts to change state and mechanically latch almost simultaneously when the cable is pulled, slackened or broken. The NC switch contacts remain open until the 2CPS is reset by properly tensioning the cable and manually rotating the reset knob. When the direct acting switch contacts open, the auxiliary contacts also actuate (open contacts close and closed contacts open). The auxiliary contacts are electrically isolated from the direct acting switch contacts. These NO (Normally Open) contacts may be used for monitoring or signaling. The 2CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN60947-1; IEC/EN60947-5-1; IEC/EN60947-5-5; UL, CE, CSA, SIL 3 capable.

***er Electronics: 2CPS Series, Cable Pull Safety Switch, Cable, Maintained Both Sides, 2NC/2NO Dir

***o: HONEYWELL MICRO SWITCH 2CPSA1A1 Cable Pull Safety Switch Dual Head 2NO/2NC

***(Formerly Allied Electronics): Cable Pull Switch; Safety; Maintained Both Sides; Gold Plated Contacts

***ark: Cable Pull Switch; Actuator Style:Ball Bearing Plunger; Circuitry:4PST-2NC/2NO; Cable Span:500ft; Contact Current Max:50mA; Operating Temp. Max:+85°C; Operating Temp. Min:-25°C; Port Size:1/2"; Port Style:NPT ;RoHS Compliant: Yes

***eywell: MICRO SWITCH 2CPS Series Cable Pull Safety Switch, Cable, Maintained Both Sides, 2NC/2NO Direct Opening (Switch 2, Left: 1NC/1NO; Switch 2, Right: 1NC/1NO), 1/2 NPT, Gold-plated Contacts The 2CPS Cable Pull Safety Switch provides readily accessible emergency stop over a long, linear distance. It is a cost-effective means of providing this emergency stop signal compared to multiple emergency stop push buttons. (Cable Pull Safety Switches are not, however, to be used as a means of personnel safeguarding. They may be used to prevent further injury or damage to equipment when used for emergency stop signaling.) The 2CPS Series Cable Pull Safety Switch is designed to provide emergency stop protection for exposed conveyor lines. The internal mechanism latches on both slackened cable (push) and pulled cable. This capability enhances productivity by eliminating nuisance stops due to variations in temperature, stretch of cable over time, and other application variables. A line in the midpoint of the cable tension window indicates proper cable tension, providing easy and intuitive set-up. The direct acting switch contacts are held closed when the actuating cable is under proper tension and the reset knob is set to RUN. When the actuating cable is pulled, slackened or broken, a cam positively opens the NC (Normally Closed) switch contacts. The snap action, trip operation causes the switch contacts to change state and mechanically latch almost simultaneously when the cable is pulled, slackened or broken. The NC switch contacts remain open until the 2CPS is reset by properly tensioning the cable and manually rotating the reset knob. When the direct acting switch contacts open, the auxiliary contacts also actuate (open contacts close and closed contacts open). The auxiliary contacts are electrically isolated from the direct acting switch contacts. These NO (Normally Open) contacts may be used for monitoring or signaling. The 2CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN60947-1; IEC/EN60947-5-1; IEC/EN60947-5-5; UL, CE, CSA, SIL 3 capable.

***roFlash: Cable Pull Switch Pull Rings (2) Manual Reset 600V AC 250V DC 50mA

***ark: Cable Pull Switch; Actuator Style:Ball Bearing Plunger; Circuitry:4PST-2NC/2NO; Cable Span:500ft; Contact Current Max:50mA; Operating Temp. Max:+85°C; Operating Temp. Min:-25°C; Port Size:1/2"; Port Style:NPT ;RoHS Compliant: Yes

***eywell: MICRO SWITCH 2CPS Series Cable Pull Safety Switch, Cable, Maintained Both Sides, 2NC/2NO Direct Opening (Switch 2, Left: 1NC/1NO; Switch 2, Right: 1NC/1NO), 1/2 NPT, Gold-plated Contacts, 120 Vac Multi-cluster LED The 2CPS Cable Pull Safety Switch provides readily accessible emergency stop over a long, linear distance. It is a cost-effective means of providing this emergency stop signal compared to multiple emergency stop push buttons. (Cable Pull Safety Switches are not, however, to be used as a means of personnel safeguarding. They may be used to prevent further injury or damage to equipment when used for emergency stop signaling.) The 2CPS Series Cable Pull Safety Switch is designed to provide emergency stop protection for exposed conveyor lines. The internal mechanism latches on both slackened cable (push) and pulled cable. This capability enhances productivity by eliminating nuisance stops due to variations in temperature, stretch of cable over time, and other application variables. A line in the midpoint of the cable tension window indicates proper cable tension, providing easy and intuitive set-up. The direct acting switch contacts are held closed when the actuating cable is under proper tension and the reset knob is set to RUN. When the actuating cable is pulled, slackened or broken, a cam positively opens the NC (Normally Closed) switch contacts. The snap action, trip operation causes the switch contacts to change state and mechanically latch almost simultaneously when the cable is pulled, slackened or broken. The NC switch contacts remain open until the 2CPS is reset by properly tensioning the cable and manually rotating the reset knob. When the direct acting switch contacts open, the auxiliary contacts also actuate (open contacts close and closed contacts open). The auxiliary contacts are electrically isolated from the direct acting switch contacts. These NO (Normally Open) contacts may be used for monitoring or signaling. The 2CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN60947-1; IEC/EN60947-5-1; IEC/EN60947-5-5; UL, CE, CSA, SIL 3 capable.

Market price

Part #	Mfg.	Description	Stock	Price
1CPSA8 DISTI # 23861622	Honeywell Sensing and Control	Switch Safety Interlock N.C. 4PST Eyelet Pull 0.05A 250VAC 60VDC Conduit 1000000Cycles Screw Mount RoHS: Compliant	1	5:$283.0125 3:$304.9973 1:$313.9598
1CPSA8 DISTI # 1CPSA8-ND	Honeywell Sensing and Control	SW SNAP ACT 4PST-NC 50MA 250V RoHS: Compliant Min Qty: 2 Container: Bulk	Temporarily Out of Stock	2:$335.3800
1CPSA8 DISTI # 71J9160	Honeywell Sensing and Control	LIMIT SWITCH-OT : ROHS COMPLIANT: YES	0	50:$302.8600 25:$319.1200 10:$331.3200 5:$343.5100 1:$369.9400
1CPSA8 DISTI # 71267942	Honeywell Sensing and Control	Safety Switches RoHS: Compliant	0	2:$304.8700 3:$296.1600 5:$287.9400
1CPSA8 DISTI # 785-1CPSA8	Honeywell Sensing and Control	Control Switches 4NC Opening, 1/2NPT Cable Pull Safety SW RoHS: Compliant	5	1:$326.7800 2:$310.7900 5:$293.3000 10:$281.9100 25:$268.8600
1CPSA8	Honeywell Sensing and Control / Clarostat	Switch Safety Interlock N.C. 4PST Eyelet Pull 0.05A 250VAC 60VDC Screw Mount Conduit 1000000Cycles RoHS: Compliant	2 In Stock	1:$297.4200 3:$288.9300 5:$268.1100
1CPSA8 DISTI # 1CPSA8	Honeywell Sensing and Control		2	1:$297.4200 3:$288.9300 5:$268.1100
1CPSA8 DISTI # 000000000001095065	Honeywell Sensing and Control / MICRO SWITCH	Switch Safety Interlock N.C. 4PST Eyelet Pull 0.05A 250VAC 60VDC Conduit 1000000Cycles Screw Mount	0	1:$304.8900 2:$288.4100 5:$284.5600

Image	Part #	Description
	Mfr.#: 1CPSA6 OMO.#: OMO-1CPSA6	Control Switches SAFETY
	Mfr.#: 1CPSA4B-N OMO.#: OMO-1CPSA4B-N	Basic / Snap Action Switches SAFETY
	Mfr.#: 1CP-N15T104 OMO.#: OMO-1CP-N15T104-1190	New and Original
	Mfr.#: 1CP0909 OMO.#: OMO-1CP0909-1190	New and Original
	Mfr.#: 1CP154AS OMO.#: OMO-1CP154AS-1190	New and Original
	Mfr.#: 1CPSA4B-N OMO.#: OMO-1CPSA4B-N-HONEYWELL-SENSING-PRODUCTIVITY	Basic / Snap Action Switches SAFETY
	Mfr.#: 1CPSA2B-N OMO.#: OMO-1CPSA2B-N-HONEYWELL-SENSING-PRODUCTIVITY	Basic / Snap Action Switches SAFETY
	Mfr.#: 1CPSA1A-N OMO.#: OMO-1CPSA1A-N-HONEYWELL-SENSING-PRODUCTIVITY	Basic / Snap Action Switches Safety/1CPS
	Mfr.#: 1CPSC2A OMO.#: OMO-1CPSC2A-HONEYWELL-SENSING-PRODUCTIVITY	Control Switches SAFETY
	Mfr.#: 1CPSA8 OMO.#: OMO-1CPSA8-HONEYWELL-SENSING-PRODUCTIVITY	Control Switches 4NC Opening, 1/2NPT Cable Pull Safety SW

1CPSA8

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes