VS-12TQ035STRRHM3

In the 90's he collected on kt315h transistors and 316h of 10 assembled, the same parts denominations. But it only worked 2 pieces normally. And the microphone even here needs a mc-3. It already stands polevik, you can hear water dripping from the tap in the next kitchen.Here is the antenna, it needs to be collected in the resonance of the frequency of the generator.Antenna is a piece of empty paste from the fountain pen. L = 50-80mm. It is wound wire sang 0.1mm in two wire diameters. 50-70 turns. The extreme bottom end is soldered into the fee. The wire from 1.5-2.5mm is inserted in the upper end, to accurately adjust the resonance to the frequency of the transmitter, the pin is pushed out of the antenna.On the zone even collected the order.These just bought to check i need to assemble the antenna on this depends on the distance. Today received, there is no time to do something.At 315 transistors it works well from 3 volts. Somewhere in the toy doll still stands.And on the street in the car clearly heard the microphone from the height of the 8th floor.

Order came on time, excellent seller recommend. the product is satisfied