TPS2330ID

Mfr. #:: TPS2330ID
Description:: Hot Swap Voltage Controllers 3-13V Sngl w/Pwr Gd Rpt Act-Lo Enable
Lifecycle:: New from this manufacturer.
Datasheet:: TPS2330ID Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
More Information:: TPS2330ID more Information TPS2330ID Product Details

Product Attribute
Attribute Value

Manufacturer:: Texas Instruments

Product Category:: Hot Swap Voltage Controllers

RoHS:: Y

Product:: Controllers & Switches

Supply Voltage - Max:: 13 V

Supply Voltage - Min:: 3 V

Number of Channels:: 1 Channel

Operating Supply Current:: 5 uA

Minimum Operating Temperature:: - 40 C

Maximum Operating Temperature:: + 85 C

Mounting Style:: SMD/SMT

Package / Case:: SOIC-14

Packaging:: Tube

Operating Temperature Range:: - 40 C to + 85 C

Series:: TPS2330

Type:: Positive Voltage

Brand:: Texas Instruments

Operating Supply Voltage:: 3 V to 13 V

Pd - Power Dissipation:: 613 mW

Product Type:: Hot Swap Voltage Controllers

Factory Pack Quantity:: 50

Subcategory:: PMIC - Power Management ICs

Unit Weight:: 0.004706 oz

Tags: TPS2330ID, TPS2330I, TPS2330, TPS233, TPS23, TPS2, TPS

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TPS2330ID Ratings and Reviews

N***t

Excellent, thank you.

2019-04-15

A***v

Got its module in 81 days. Track number did not crack. Packed just in the mail envelope, but came in whole. Connected one acum, like it works. It is not clear there is a choice when ordering 12 or 21 volts and the price does not change, so they are all 21 volts maximum and minimum by 4, while the details and the board are the same. Transistors are some others, not the ones in the photo. Order and price is satisfied. Thanks to the seller.

2019-04-29

M***z

2019-07-14

TPS2330ID Description

***as Instruments: 3-V-13-V hot swap controller with active low enable 14-SOIC -40 to 85

***ical: Hot Swap Controller 1-CH 13V N-Channel Positive Voltage 14-Pin SOIC Tube

***ser: Hot Swap and Power Distribution 3-13V Sngl w/Pwr Gd Rpt, Act-Lo Enable

***nell: CONTROLLER, HOT SWAP, SMD, SOIC14; Controller Applications:Hot-Swap Power Controller; Input Voltage:13V; Internal Switch:No; Supply Voltage Range:3V to 13V; Digital IC Case Style:SOIC; No. of Pins:14; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (19-Dec-2012); Input Voltage Max:13V; Operating Temperature Max:+85°C; Operating Temperature Min:-40°C; Package / Case:SOIC; Termination Type:SMD

***ASI: The TPS2330 and TPS2331 are single-channel hot-swap controllers that use external N-channel MOSFETs as high-side switches in power applications. Features of these devices, such as overcurrent protection (OCP), inrush-current control, output-power status reporting, and the ability to discriminate between load transients and faults, are critical requirements for hot-swap applications.

***AS INSRUMENT: The TPS2330/31 devices incorporate undervoltage lockout (UVLO) and power-good (PG) reporting to ensure the device is off at start-up and confirm the status of the output voltage rails during operation. An internal charge pump, capable of driving multiple MOSFETs, provides enough gate-drive voltage to fully enhance the N-channel MOSFETs. The charge pump controls both the rise times and fall times (dV/dt) of the MOSFETs, reducing power transients during power up/down. The circuit-breaker functionality combines the ability to sense overcurrent conditions with a timer function; this allows designs such as DSPs, that may have high peak currents during power-state transitions, to disregard transients for a programmable period.

***XS: DISCH – DISCH should be connected to the source of the external N-channel MOSFET transistor connected to GATE. This pin discharges the load when the MOSFET transistor is disabled. They also serve as reference-voltage connection for internal gate-voltage-clamp circuitry.

***NS: ENABLE or ENABLE – ENABLE for TPS2330 is active-low. ENABLE for TPS2331 is active-high. When the controller is enabled, GATE voltage powers up to turn on the external MOSFETs. When the ENABLE pin is pulled high for TPS2330 or the ENABLE pin is pulled low for TPS2331 for more than 50 µs, the gate of the MOSFET is discharged at a controlled rate by a current source, and a transistor is enabled to discharge the output bulk capacitance. In addition, the device turns on the internal regulator PREREG (see VREG) when enabled and shuts down PREREG when disabled so that total supply current is much less than 5 µA.

***ASIN: FAULT – FAULT is an open-drain overcurrent flag output. When an overcurrent condition is sustained long enough to charge TIMER to 0.5 V, the device latches off and pulls FAULT low. In order to turn the device back on, either the enable pin must be toggled or the input power must be cycled.

***ASI: GATE – GATE connects to the gate of the external N-channel MOSFET transistor. When the device is enabled, internal charge-pump circuitry pulls this pin up by sourcing approximately 15 µA. The turnon slew rates depend on the capacitance present at the GATE terminal. If desired, the turnon slew rates can be further reduced by connecting capacitors between this pin and ground. These capacitors also reduce inrush current and protect the device from false overcurrent triggering during power up. The charge-pump circuitry generates gate-to-source voltages of 9 V–12 V across the external MOSFET transistor.

***INS: IN – IN should be connected to the power source driving the external N-channel MOSFET transistor connected to GATE. The TPS2330/31 draws its operating current from IN, and remains disabled until the IN power supply has been established. The device has been constructed to support 3-V, 5-V, or 12-V operation.

***AS INSTUMENTS: ISENSE, ISET – ISENSE in combination with ISET implements overcurrent sensing for GATE. ISET sets the magnitude of the current that generates an overcurrent fault, through an external resistor connected to ISET. An internal current source draws 50 µA from ISET. With a sense resistor from IN to ISENSE, which is also connected to the drain of the external MOSFET, the voltage on the sense resistor reflects the load current. An overcurrent condition is assumed to exist if ISENSE is pulled below ISET. To ensure proper circuit breaker operation, VI(ISENSE) and VI(ISET) should never exceed VI(IN).

***AS INSTRUMENTS INCORPORATED: PWRGD – PWRGD signals the presence of undervoltage conditions on VSENSE. The pin is an open-drain output and is pulled low during an undervoltage condition. To minimize erroneous PWRGD responses from transients on the voltage rail, the voltage sense circuit incorporates a 20-µs deglitch filter. When VSENSE is lower than the reference voltage (about 1.23 V), PWRGD is active-low to indicate an undervoltage condition on the power-rail voltage. PWRGD may not correctly report power conditions when the device is disabled because there is no gate drive power for the PWRGD output transistor in the disable mode, or, in other words, PWRGD is floating. Therefore, PWRGD is pulled up to its pullup power supply rail in disable mode.

***: TIMER – A capacitor on TIMER sets the time during which the power switch can be in overcurrent before turning off. When the overcurrent protection circuits sense an excessive current, a current source is enabled which charges the capacitor on TIMER. Once the voltage on TIMER reaches approximately 0.5 V, the circuit-breaker latch is set and the power switch is latched off. Power must be recycled or the ENABLE pin must be toggled to restart the controller. In high-power or high-temperature applications, a minimum 50-pF capacitor is strongly recommended from TIMER to ground, to prevent any false triggering.

***AS: VREG – VREG is the output of an internal low-dropout voltage regulator, where IN1 is the input. The regulator is used to generate a regulated voltage source, less than 5.5 V, for the device. A 0.1-µF ceramic capacitor should be connected between VREG and ground to aid in noise rejection. In this configuration, on disabling the device, the internal low-dropout regulator also is disabled, which removes power from the internal circuitry and allows the device to be placed in low-quiescent-current mode. In applications where IN1 is less than 5.5 V, VREG and IN1 may be connected together. However, under these conditions, disabling the device may not place the device in low-quiescent-current mode, because the internal low-dropout voltage regulator is being bypassed, thereby keeping internal circuitry operational. If VREG and IN1 are connected together, a 0.1-µF ceramic capacitor between VREG and ground is not needed if IN1 already has a bypass capacitor of 1 µF to 10 µF.

***INS: VSENSE – VSENSE can be used to detect undervoltage conditions on external circuitry. If VSENSE senses a voltage below approximately 1.23 V, PWRGD is pulled low.

Market price

Part #	Description	Stock	Price
TPS2330ID DISTI # V99:2348_07412634	Hot Swap Controller 1-CH 13V 14-Pin SOIC Tube RoHS: Compliant	69	1000:$1.6940 500:$2.0050 100:$2.3449 10:$2.8300 1:$3.1410
TPS2330ID DISTI # V39:1801_07412634	Hot Swap Controller 1-CH 13V 14-Pin SOIC Tube RoHS: Compliant	0
TPS2330IDR DISTI # V39:1801_07412637	Hot Swap Controller 1-CH 13V 14-Pin SOIC T/R RoHS: Compliant	0
TPS2330ID DISTI # 296-6768-5-ND	IC HOT SWAP CONTROLLER 14-SOIC RoHS: Compliant Min Qty: 1 Container: Tube	119In Stock	5000:$1.6358 2500:$1.6997 1000:$1.7892 500:$2.1215 100:$2.4921 50:$2.8756 10:$3.0420 1:$3.3900
TPS2330IDR DISTI # TPS2330IDR-ND	IC HOT SWAP PWR CONT 14-SOIC RoHS: Compliant Min Qty: 2500 Container: Tape & Reel (TR)	Temporarily Out of Stock	2500:$1.4164
TPS2330IDRG4 DISTI # TPS2330IDRG4-ND	IC HOT SWAP PWR CONT 14-SOIC RoHS: Compliant Min Qty: 2500 Container: Tape & Reel (TR)	Temporarily Out of Stock	2500:$1.4164
TPS2330IDR DISTI # 32035658	Hot Swap Controller 1-CH 13V 14-Pin SOIC T/R RoHS: Compliant	10000	2500:$1.3482
TPS2330ID DISTI # 23510267	Hot Swap Controller 1-CH 13V 14-Pin SOIC Tube RoHS: Compliant	750	500:$1.7117 250:$1.7586 100:$1.8082 50:$1.8606 25:$1.9161 6:$1.9751
TPS2330ID DISTI # 25865699	Hot Swap Controller 1-CH 13V 14-Pin SOIC Tube RoHS: Compliant	69	1000:$1.8211 500:$2.1554 100:$2.5208 10:$3.0423 4:$3.3766
TPS2330ID DISTI # TPS2330ID	Hot Swap Controller 1-CH 13V 14-Pin SOIC Tube (Alt: TPS2330ID) RoHS: Compliant Min Qty: 1 Container: Tube	Europe - 50	1:€2.0900 10:€1.9900 25:€1.8900 50:€1.7900 100:€1.6900 500:€1.5900 1000:€1.4900
TPS2330ID DISTI # TPS2330ID	Hot Swap Controller 1-CH 13V 14-Pin SOIC Tube - Rail/Tube (Alt: TPS2330ID) RoHS: Compliant Min Qty: 200 Container: Tube	Americas - 0	200:$1.7900 300:$1.6900 500:$1.6900 1000:$1.5900 2000:$1.5900
TPS2330IDR DISTI # TPS2330IDR	Hot Swap Controller 1-CH 13V 14-Pin SOIC T/R (Alt: TPS2330IDR) RoHS: Compliant Min Qty: 2500 Container: Tape and Reel	Europe - 0	2500:€1.7900 5000:€1.5900 10000:€1.3900 15000:€1.2900 25000:€1.2900
TPS2330IDR DISTI # TPS2330IDR	Hot Swap Controller 1-CH 13V 14-Pin SOIC T/R - Tape and Reel (Alt: TPS2330IDR) RoHS: Compliant Min Qty: 2500 Container: Reel	Americas - 0	2500:$1.4900 5000:$1.3900 10000:$1.3900 15000:$1.2900 25000:$1.2900
TPS2330IDRG4 DISTI # TPS2330IDRG4	Hot Swap Controller 1-CH 13V 14-Pin SOIC T/R - Tape and Reel (Alt: TPS2330IDRG4) RoHS: Compliant Min Qty: 2500 Container: Reel	Americas - 0	2500:$1.4900 5000:$1.3900 10000:$1.3900 15000:$1.2900 25000:$1.2900
TPS2330ID	3-13V Single Hot-Swap IC w/ Power Good Report, Act-Low Enable	3995	1000:$1.4500 750:$1.5200 500:$1.8000 250:$2.1200 100:$2.2600 25:$2.5800 10:$2.7700 1:$3.0800
TPS2330ID DISTI # 595-TPS2330ID	Hot Swap Voltage Controllers 3-13V Sngl w/Pwr Gd Rpt Act-Lo Enable RoHS: Compliant	199	1:$3.3800 10:$3.0400 100:$2.4900 250:$2.3300 500:$2.1200 1000:$1.7900 2500:$1.7000
TPS2330IDR DISTI # 595-TPS2330IDR	Hot Swap Voltage Controllers 3-13V Sngl w/Pwr Gd Rpt Act-Lo Enable RoHS: Compliant	0	1:$2.8200 10:$2.5400 100:$2.0700 250:$1.9500 500:$1.7600 1000:$1.4900 2500:$1.4100 5000:$1.3600
TPS2330IDRG4 DISTI # 595-TPS2330IDRG4	Hot Swap Voltage Controllers 3-13V Sngl w/Pwr Gd Rpt Act-Lo Enable RoHS: Compliant	0	2500:$1.4100 5000:$1.3600
TPS2330IDG4 DISTI # 595-TPS2330IDG4	Hot Swap Voltage Controllers 3-13V Sngl w/Pwr Gd Rpt Act-Lo Enable RoHS: Compliant	0
TPS2330ID	Power Supply Support Circuit, Adjustable, 1 Channel, PDSO14 RoHS: Compliant	4830	1000:$1.9600 500:$2.0600 100:$2.1500 25:$2.2400 1:$2.4100
TPS2330ID	POWER SUPPLY SUPPORT CIRCUIT, ADJUSTABLE, 1 CHANNEL, PDSO14	88
TPS2330ID		8
TPS2330ID DISTI # 1461197	CONTROLLER, HOT SWAP, SMD, SOIC14 RoHS: Not Compliant	0	5000:$2.4300 2500:$2.5300 1000:$2.6600 500:$3.1600 100:$3.7100 50:$4.2800 10:$4.5200 1:$5.0300

Image	Part #	Description
	Mfr.#: CDCVF2310PW OMO.#: OMO-CDCVF2310PW	Clock Buffer CLOCK BUFFER
	Mfr.#: TCA4311ADGKR OMO.#: OMO-TCA4311ADGKR	Interface - Signal Buffers, Repeaters Hot Swappable 2-Wire Bus Buffers
	Mfr.#: TXS0206YFPR OMO.#: OMO-TXS0206YFPR	Translation - Voltage Levels MMC,SD Card,Memory Stick Vltg-Tran Xcvr
	Mfr.#: TPS2031D OMO.#: OMO-TPS2031D	Power Switch ICs - Power Distribution 0.66A 2.7-5.5V Sngl Hi-Side MOSFET
	Mfr.#: TPS2330EVM-184 OMO.#: OMO-TPS2330EVM-184-TEXAS-INSTRUMENTS	TPS2330 Hot Swap Controller Evaluation Board
	Mfr.#: TCA4311ADGKR OMO.#: OMO-TCA4311ADGKR-TEXAS-INSTRUMENTS	Interface - Signal Buffers, Repeaters Hot Swappable 2-Wire Bus Buffers
	Mfr.#: TXS0206YFPR OMO.#: OMO-TXS0206YFPR-TEXAS-INSTRUMENTS	Translation - Voltage Levels MMC,SD Card,Memory Stick Vltg-Tran Xcv
	Mfr.#: CDCVF2310PW OMO.#: OMO-CDCVF2310PW-TEXAS-INSTRUMENTS	Clock Buffer CLOCK BUFFER
	Mfr.#: TPS2031D OMO.#: OMO-TPS2031D-TEXAS-INSTRUMENTS	USB Switch ICs 0.66A 2.7-5.5V Sngl Hi-Side MOSFET
	Mfr.#: LM82CIMQA/NOPB OMO.#: OMO-LM82CIMQA-NOPB-TEXAS-INSTRUMENTS	SENSOR DIGITAL -40C-125C 16SSOP