ML4800CP

Mfr. #:: ML4800CP
Manufacturer:: ON Semiconductor
Description:: IC PFC CTRLR AVERAGE CURR 16DIP
Lifecycle:: New from this manufacturer.
Datasheet:: ML4800CP Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

Product Attribute
Attribute Value

Manufacturer: FAIRCHIL

Product Category: IC Chips

Series: -

Packaging: Tube

Package-Case: 16-DIP (0.300", 7.62mm)

Operating-Temperature: 0°C ~ 70°C

Mounting-Type: Through Hole

Voltage-Supply: 11 V ~ 16.5 V

Supplier-Device-Package: 16-DIP

Frequency-Switching: 76kHz

Mode: Average Current

Current-Startup: 200μA

Tags: ML4800CP, ML4800C, ML4800, ML480, ML48, ML4

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

ML4800CP Description

***ical: Power Factor Correction PWM CONTRLR 0.2mA 81kHz 16-Pin PDIP W Rail

***inecomponents.com: ANG FG, Power Factor Correction and PWM Controller Combo

***eco: IC,ML4800CP,ANG FG, POWER FACT OR CORRECT'N- PWM CONTROLLER

***Semiconductor: CCM PFC + PWM Combination Controller

***ark: IC,PWM/PFC CONTROL,CURRENT/VOLT,PDIP-16

***ment14 APAC: IC, PFC & PWM CONTROLLER, 16.5V, 16-DIP

***et: POWER FACTOR CORRECTION (PFC) AND PWM CONTROLLER COMBO

***i-Key: IC PFC CTRLR AVERAGE CURR 16DIP

***Components: Power factor PWMcontroller ML4800CP 7.5V

***ser: Converters PFC Controller PWM Combo

***nell: PFC/PWM COMBO, 4800, DIP16; Controller Type:PWM; Voltage, Input Max:16.5V; Voltage, Output Max:7.6V; Max Output Current:1A; Output Type:Voltage; Input Current:10mA; Output Energy per Cycle:1.5µJ; Frequency:250kHz; Voltage, Supply Min:11V; Voltage, Supply Max:16.5V; Termination Type:Through Hole; Case Style:DIP; No. of Pins:16; Operating Temperature Range:0°C to +70°C; Temp, Op. Max:70°C; Temp, Op. Min:0°C; Base Number:4800; IC Generic Number:4800; Logic Function Number:4800; Temperature Range, IC:Commercial; Current, Start-up:220µA; Voltage, Output:7.5V

***rchild Semiconductor: The ML4800 is a controller for power factor corrected, switched mode power supplies. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully complies with IEC1000-3-2 specification. Intended as a BiCMOS version of the industry-standard ML4824, the ML4800 includes circuits for the implementation of leading edge, average current, "boost" type power factor correction and a trailing edge, pulse width modulator (PWM). It also includes a TriFault Detec™ function to help ensure that no unsafe conditions will result from single component failure in the PFC. Gate-drivers with 1A capabilities minimize the need for external driver circuits. Low power requirements improve efficiency and reduce component costs.An over-voltage comparator shuts down the PFC section in the event of a sudden decrease in load. The PFC section also includes peak current limiting and input voltage brownout protection. The PWM section can be operated in current or voltage mode, at up to 250kHz, and includes an accurate 50% duty cycle limit to prevent transformer saturation.

***th Star Micro: The ML4800 is a controller for power factor corrected, switched mode power supplies. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully complies with IEC1000-3-2 specification. Intended as a BiCMOS version of the industry-standard ML4824, the ML4800 includes circuits for the implementation of leading edge, average current, "boost" type power factor correction and a trailing edge, pulse width modulator (PWM). It also includes a TriFault Detec function to help ensure that no unsafe conditions will result from single component failure in the PFC. Gate-drivers with 1A capabilities minimize the need for external driver circuits. Low power requirements improve efficiency and reduce component costs. An over-voltage comparator shuts down the PFC section in the event of a sudden decrease in load Product Highlights: Internally synchronized leading-edge PFC and trailing-edge PWM in one IC TriFault Detect for UL1950 compliance and enhanced safety Slew rate enhanced transconductance error amplifier for ultra-fast PFC response Low power: 200A startup current, 5.5mA operating current Low total harmonic distortion, high PF Reduced ripple current in storage capacitor between PFC and PWM sections Average current, continuous boost leading edge PFC PWM configurable for current-mode or voltage mode operation Current fed gain modulator for improved noise immunity Overvoltage and brown-out protection, UVLO, and soft start

Market price

Part #	Mfg.	Description	Stock	Price
ML4800CP DISTI # ML4800CP-ND	ON Semiconductor	IC PFC CTRLR AVERAGE CURR 16DIP RoHS: Compliant Min Qty: 500 Container: Tube	Limited Supply - Call
ML4800CP DISTI # 82C8714	ON Semiconductor	PFC & PWM CONTROLLER, 16.5V, 16-DIP,UVLO:13V,Supply Voltage Min:11V,Supply Voltage Max:16.5V,Startup Current:200µA,Operating Supply Current:5.5mA,Controller IC Case Style:DIP,No. of Pins:16Pins,Duty Cycle (%):95%,MSL:- RoHS Compliant: Yes	0
ML4800CP DISTI # 512-ML4800CP	ON Semiconductor	Power Factor Correction - PFC PFC Controller PWM Combo RoHS: Compliant	0
ML4800CP_Q DISTI # 512-ML4800CP_Q	ON Semiconductor	Power Factor Correction - PFC PFC Controller PWM Combo RoHS: Not compliant	0
ML4800CP_NL DISTI # 512-ML4800CP-NL	ON Semiconductor	Power Factor Correction - PFC Power Factor PWM Contrl 0.2mA 81KHz RoHS: Compliant	0
ML4800CP		Power Factor Correction and PWM Controller	0
ML4800CP_Q		Power Factor Correction and PWM Controller	0
ML4800CPX_NL		Power Factor Correction and PWM Controller	0
ML4800CP_NL		Power Factor Correction and PWM Controller	0
ML4800CPX_Q		Power Factor Correction and PWM Controller	0
ML4800CPX		Power Factor Correction and PWM Controller	0
ML4800CP DISTI # 1013883	ON Semiconductor	IC,PWM/PFC CONTROL,CURRENT/VOLT,PDIP-16 RoHS: Compliant	0	1:$6.0300 10:$5.2600 100:$4.7700 250:$4.3600 500:$4.0200 1000:$3.4700 2500:$3.2500 5000:$3.1100

Image	Part #	Description
	Mfr.#: ML4800CP_Q OMO.#: OMO-ML4800CP-Q-1190	Power Factor Correction and PWM Controlle
	Mfr.#: ML4803C1 OMO.#: OMO-ML4803C1-1190	New and Original
	Mfr.#: ML4803CP2 OMO.#: OMO-ML4803CP2-1190	Power Factor Correction - PFC PFC Controller PWM Combo
	Mfr.#: ML4822CSX OMO.#: OMO-ML4822CSX-1190	- Bulk (Alt: ML4822CSX)
	Mfr.#: ML4823CP-ML4823 OMO.#: OMO-ML4823CP-ML4823-1190	New and Original
	Mfr.#: ML4824CP-1 FAI OMO.#: OMO-ML4824CP-1-FAI-1190	New and Original
	Mfr.#: ML4824CS2X_NL OMO.#: OMO-ML4824CS2X-NL-1190	New and Original
	Mfr.#: ML4872CS3 OMO.#: OMO-ML4872CS3-1190	Conv DC-DC Single Step Up 1.8V to 3.15V 8-Pin SOP T/R
	Mfr.#: ML4877CR OMO.#: OMO-ML4877CR-1190	New and Original
	Mfr.#: ML4896ES OMO.#: OMO-ML4896ES-1190	New and Original

ML4800CP

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes