TPS2320IPW

Mfr. #:: TPS2320IPW
Description:: Hot Swap Voltage Controllers 3-13V Dual w/Ind Chl Circuit Breaking
Lifecycle:: New from this manufacturer.
Datasheet:: TPS2320IPW Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
More Information:: TPS2320IPW more Information TPS2320IPW Product Details

Product Attribute
Attribute Value

Manufacturer:: Texas Instruments

Product Category:: Hot Swap Voltage Controllers

RoHS:: Y

Product:: Controllers & Switches

Supply Voltage - Max:: 13 V

Supply Voltage - Min:: 3 V

Number of Channels:: 2 Channel

Operating Supply Current:: 1 mA, 200 uA

Minimum Operating Temperature:: - 40 C

Maximum Operating Temperature:: + 85 C

Mounting Style:: SMD/SMT

Package / Case:: TSSOP-16

Packaging:: Tube

Operating Temperature Range:: - 40 C to + 85 C

Series:: TPS2320

Type:: Positive Voltage

Brand:: Texas Instruments

Operating Supply Voltage:: 3 V to 13 V

Product Type:: Hot Swap Voltage Controllers

Factory Pack Quantity:: 90

Subcategory:: PMIC - Power Management ICs

Unit Weight:: 0.002183 oz

Tags: TPS2320IP, TPS2320I, TPS2320, TPS232, TPS23, TPS2, TPS

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TPS2320IPW Ratings and Reviews

A***u

Match description

2019-04-04

N***i

it took more then 2 months to reach

2019-07-06

E**e

All ok!

2019-05-30

TPS2320IPW Description

***as Instruments: 3-V-13-V dual channel hot swap with active low enable 16-TSSOP -40 to 85

***ical: Hot Swap Controller 2-CH 5.5V/13V N-Channel Positive Voltage 16-Pin TSSOP Tube

***ser: Hot Swap and Power Distribution 3-13V Dual w/Ind Chl Circuit Breaking

***ark: Hot Swap Controller IC; Input Voltage Primary Max:13V; Supply Voltage Min:3V; Supply Voltage Max:13V; Package/Case:16-TSSOP; No. of Pins:16; Operating Temperature Range:-40°C to +85°C; Leaded Process Compatible:Yes ;RoHS Compliant: Yes

***AS INSTRUM: The TPS2320 and TPS2321 are dual-channel hot-swap controllers that use external N-channel MOSFETs as high-side switches in power applications. Features of these devices, such as overcurrent protection (OCP), inrush-current control, and the ability to discriminate between load transients and faults, are critical requirements for hot-swap applications.

***AS INSRUMENT: The TPS2320/21 devices incorporate undervoltage lockout (UVLO) to ensure the device is off at startup. Each internal charge pump, capable of driving multiple MOSFETs, provides enough gate-drive voltage to fully enhance the N-channel MOSFETs. The charge pumps control both the rise times and fall times (dv/dt) of the MOSFETs, reducing power transients during power up/down. The circuit-breaker functionality combines the ability to sense overcurrent conditions with a timer function; this allows designs such as DSPs, that may have high peak currents during power-state transitions, to disregard transients for a programmable period.

***XS: DISCH1, DISCH2 – DISCH1 and DISCH2 should be connected to the sources of the external N-channel MOSFET transistors connected to GATE1 and GATE2, respectively. These pins discharge the loads when the MOSFET transistors are disabled. They also serve as reference-voltage connections for internal gate voltage-clamp circuitry.

***ASI: ENABLE or ENABLE – ENABLE for TPS2320 is active low. ENABLE for TPS2321 is active high. When the controller is enabled, both GATE1 and GATE2 voltages will power up to turn on the external MOSFETs. When the ENABLE pin is pulled high for TPS2320 or the ENABLE pin is pulled low for TPS2321 for more than 50 µs, the gate of the MOSFET is discharged at a controlled rate by a current source, and a transistor is enabled to discharge the output bulk capacitance. In addition, the device turns on the internal regulator PREREG (see VREG) when enabled and shuts down PREREG when disabled so that total supply current is much less than 5µA.

***AS INSTRUMENTS INC: FAULT – FAULT is an open-drain overcurrent flag output. When an overcurrent condition in either channel is sustained long enough to charge TIMER to 0.5 V, the overcurrent channel latches off and pulls FAULT low. The other channel will run normally if not in overcurrent. In order to turn the channel back on, either the enable pin has to be toggled or the input power has to be cycled.

***XS: GATE1, GATE2 – GATE1 and GATE2 connect to the gates of external N-channel MOSFET transistors. When the device is enabled, internal charge-pump circuitry pulls these pins up by sourcing approximately 15µA to each. The turnon slew rates depend upon the capacitance present at the GATE1 and GATE2 terminals. If desired, the turnon slew rates can be further reduced by connecting capacitors between these pins and ground. These capacitors also reduce inrush current and protect the device from false overcurrent triggering during power up. The charge-pump circuitry will generate gate-to-source voltages of 9 V-12 V across the external MOSFET transistors.

***OMO Electronic: IN1, IN2 – IN1 and IN2 should be connected to the power sources driving the external N-channel MOSFET transistors connected to GATE1 and GATE2, respectively. The TPS2320/TPS2321 draws its operating current from IN1, and both channels will remain disabled until the IN1 power supply has been established. The IN1 channel has been constructed to support 3-V, 5-V, or 12-V operation, while the IN2 channel has been constructed to support 3-V or 5-V operation

***: ISENSE1, ISENSE2, ISET1, ISET2 – ISENSE1 and ISENSE2, in combination with ISET1 and ISET2, implement overcurrent sensing for GATE1 and GATE2. ISET1 and ISET2 set the magnitude of the current that generates an overcurrent fault, through external resistors connected to ISET1 and ISET2. An internal current source draws 50 µA from ISET1 and ISET2. With a sense resistor from IN1 to ISENSE1 or from IN2 to ISENSE2, which is also connected to the drains of external MOSFETs, the voltage on the sense resistor reflects the load current. An overcurrent condition is assumed to exist if ISENSE1 is pulled below ISET1 or if ISENSE2 is pulled below ISET2. To ensure proper circuit breaker operation, VI(ISENSE1) and VI(ISET1) should never exceed VI(IN1). Similarly, VI(ISENSE2) and VI(ISET2) should never exceed VI(IN2).

***TEXAS: TIMER – A capacitor on TIMER sets the time during which the power switch can be in overcurrent before turning off. When the overcurrent protection circuits sense an excessive current, a current source is enabled which charges the capacitor on TIMER. Once the voltage on TIMER reaches approximately 0.5 V, the circuit-breaker latch is set and the power switch is latched off. Power must be recycled or the ENABLE pin must be toggled to restart the controller. In high-power or high-temperature applications, a minimum 50-pF capacitor is strongly recommended from TIMER to ground, to prevent any false triggering.

***AS INTRUMENTS: VREG – VREG is the output of an internal low-dropout voltage regulator, where IN1 is the input. The regulator is used to generate a regulated voltage source, less than 5.5 V, for the device. A 0.1-Î¼F ceramic capacitor should be connected between VREG and ground to aid in noise rejection. In this configuration, upon disabling the device, the internal low-dropout regulator will also be disabled, which removes power from the internal circuitry and allows the device to be placed in low-quiescent-current mode. In applications where IN1 is less than5.5 V, VREG and IN1 may be connected together. However, under these conditions, disabling the device will not place the device in low-quiescent-current mode, because the internal low-dropout voltage regulator is being bypassed, thereby keeping internal circuitry operational. If VREG and IN1 are connected together, a 0.1-µF ceramic capacitor between VREG and ground is not needed if IN1 already has a bypass capacitor of 1µF to 10µF.

Market price

Part #	Description	Stock	Price
TPS2320IPW DISTI # V39:1801_07412620	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP Tube RoHS: Compliant	0
TPS2320IPWR DISTI # V39:1801_07412624	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP T/R RoHS: Compliant	0
TPS2320IPW DISTI # 296-2323-5-ND	IC DUAL HOTSWAP PWR CONT 16TSSOP RoHS: Compliant Min Qty: 1 Container: Tube	166In Stock	2520:$2.1067 1080:$2.2176 540:$2.6294 180:$3.0888 90:$3.5640 10:$3.7700 1:$4.2000
TPS2320IPWR DISTI # TPS2320IPWR-ND	IC DUAL HOTSWAP PWR CONT 16TSSOP RoHS: Compliant Min Qty: 2000 Container: Tape & Reel (TR)	Temporarily Out of Stock	2000:$1.7556
TPS2320IPWRG4 DISTI # TPS2320IPWRG4-ND	IC DUAL HOTSWAP PWR CONT 16TSSOP RoHS: Compliant Min Qty: 2000 Container: Tape & Reel (TR)	Temporarily Out of Stock	2000:$1.7556
TPS2320IPWG4 DISTI # TPS2320IPWG4-ND	IC DUAL HOTSWAP PWR CONT 16TSSOP RoHS: Compliant Min Qty: 180 Container: Tube	Temporarily Out of Stock	180:$3.0888
TPS2320IPW DISTI # TPS2320IPW	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP Tube - Rail/Tube (Alt: TPS2320IPW) RoHS: Compliant Min Qty: 180 Container: Tube	Americas - 0	180:$2.1900 360:$2.0900 540:$2.0900 900:$1.9900 1800:$1.8900
TPS2320IPW DISTI # TPS2320IPW	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP Tube (Alt: TPS2320IPW) RoHS: Compliant Min Qty: 1 Container: Tube	Europe - 0	1:€2.6900 10:€2.4900 25:€2.2900 50:€2.1900 100:€2.0900 500:€1.9900 1000:€1.8900
TPS2320IPWR DISTI # TPS2320IPWR	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP T/R - Tape and Reel (Alt: TPS2320IPWR) RoHS: Compliant Min Qty: 2000 Container: Reel	Americas - 0	2000:$1.8900 4000:$1.7900 8000:$1.6900 12000:$1.6900 20000:$1.5900
TPS2320IPWR DISTI # TPS2320IPWR	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP T/R (Alt: TPS2320IPWR) RoHS: Compliant Min Qty: 2000 Container: Tape and Reel	Europe - 0	2000:€2.1900 4000:€1.8900 8000:€1.6900 12000:€1.6900 20000:€1.5900
TPS2320IPWG4 DISTI # TPS2320IPWG4	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP Tube - Rail/Tube (Alt: TPS2320IPWG4) RoHS: Compliant Min Qty: 180 Container: Tube	Americas - 0	180:$2.1900 360:$2.0900 540:$2.0900 900:$1.9900 1800:$1.8900
TPS2320IPWRG4 DISTI # TPS2320IPWRG4	Hot Swap Controller 2-CH 5.5V/13V 16-Pin TSSOP T/R - Tape and Reel (Alt: TPS2320IPWRG4) RoHS: Compliant Min Qty: 2000 Container: Reel	Americas - 0	2000:$1.8900 4000:$1.7900 8000:$1.6900 12000:$1.6900 20000:$1.5900
TPS2320IPW	3-13V Dual Hot-Swap IC w/ Independent Channel Circuit Breaking, Act-Low Enable	4230	1000:$1.8000 750:$1.8900 500:$2.2300 250:$2.6300 100:$2.8000 25:$3.2000 10:$3.4400 1:$3.8200
TPS2320IPW DISTI # 595-TPS2320IPW	Hot Swap Voltage Controllers 3-13V Dual w/Ind Chl Circuit Breaking RoHS: Compliant	52	1:$4.1900 10:$3.7700 100:$3.0800 250:$2.8900 500:$2.6300 1000:$2.2100 2500:$2.1000
TPS2320IPWRG4 DISTI # 595-TPS2320IPWRG4	Hot Swap Voltage Controllers 3-13V Dual w/Ind Chl Circuit Breaking RoHS: Compliant	0	2000:$1.7500 4000:$1.6900
TPS2320IPWR DISTI # 595-TPS2320IPWR	Hot Swap Voltage Controllers 3-13V Dual w/Ind Chl Circuit Breaking RoHS: Compliant	0	2000:$1.7500 4000:$1.6900
TPS2320IPWG4 DISTI # 595-TPS2320IPWG4	Hot Swap Voltage Controllers 3-13V Dual w/Ind Chl Circuit Breaking RoHS: Compliant	0	180:$3.0800 270:$2.8900 540:$2.6300 1080:$2.2100 2520:$2.1000
TPS2320IPW	Power Supply Support Circuit, Adjustable, 2 Channel, PDSO16 RoHS: Compliant	12060	1000:$2.0800 500:$2.1900 100:$2.2800 25:$2.3800 1:$2.5600
TPS2320IPW		79
TPS2320IPWG4		65	2:$3.9200 8:$2.5480 21:$1.9600
TPS2320IPWG4		52	8:$2.6250 3:$3.5000 1:$5.2500
TPS2320IPWR	2-CHANNEL POWER SUPPLY SUPPORT CKT, 16 Pin Plastic SOP	4	3:$2.9000 1:$4.3500

Image	Part #	Description
	Mfr.#: 24LC64-I/SN OMO.#: OMO-24LC64-I-SN	EEPROM 8kx8 - 2.5V
	Mfr.#: LM25069PMME-2/NOPB OMO.#: OMO-LM25069PMME-2-NOPB	Hot Swap Voltage Controllers Positive Lo Vtg pwr Hot Swap Cntlr
	Mfr.#: SN75HVD06DR OMO.#: OMO-SN75HVD06DR	RS-485 Interface IC High-Output RS-485 Transceiver
	Mfr.#: NVMFS6H818NWFT1G OMO.#: OMO-NVMFS6H818NWFT1G	MOSFET TRENCH 8 80V NFET POWER MOSFET
	Mfr.#: DMG4822SSD-13 OMO.#: OMO-DMG4822SSD-13	MOSFET MOSFET BVDSS: 31V-40 1V-40V,SO-8,2.5K
	Mfr.#: SN74LVC14APWR OMO.#: OMO-SN74LVC14APWR	Inverters Hex Schmitt-Trigger
	Mfr.#: STM32F103RCT6 OMO.#: OMO-STM32F103RCT6	ARM Microcontrollers - MCU 32BIT Cortex M3 H/D 256 to 512 USB/CAN
	Mfr.#: TPS54620RGYR OMO.#: OMO-TPS54620RGYR	Switching Voltage Regulators 4.5-17Vin 6A Synch St Down SWIFT Cnvtr
	Mfr.#: TLV75533PDBVR OMO.#: OMO-TLV75533PDBVR	LDO Voltage Regulators 500MA LDO
	Mfr.#: EMK212BB7106KG-T OMO.#: OMO-EMK212BB7106KG-T	Multilayer Ceramic Capacitors MLCC - SMD/SMT 10uF 16V X7R 10% 0805