PartNumber | TS931IDT | TS931I | TS931ID |
Description | Operational Amplifiers - Op Amps Single Rail-to-Rail | IC OPAMP GP 100KHZ RRO 8SO | |
Manufacturer | STMicroelectronics | ST | ST |
Product Category | Operational Amplifiers - Op Amps | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
RoHS | Y | - | - |
Mounting Style | SMD/SMT | - | - |
Package / Case | SO-8 | - | - |
Supply Voltage Max | 10 V | - | - |
Output Current per Channel | 5 mA | - | - |
Number of Channels | 1 Channel | - | - |
GBP Gain Bandwidth Product | 100 kHz | - | - |
SR Slew Rate | 50 V/us | - | - |
CMRR Common Mode Rejection Ratio | 55 dB | - | - |
Ib Input Bias Current | 150 pA | - | - |
Vos Input Offset Voltage | 10 mV | - | - |
Supply Voltage Min | 2.7 V | - | - |
Operating Supply Current | 20 uA | - | - |
Minimum Operating Temperature | - 40 C | - | - |
Maximum Operating Temperature | + 105 C | - | - |
Shutdown | No Shutdown | - | - |
Series | TS931 | - | - |
Packaging | Reel | - | Tray |
Amplifier Type | Micropower Operational Amplifier | - | - |
Height | 1.65 mm (Max) | - | - |
Input Type | CMOS | - | - |
Length | 5 mm (Max) | - | - |
Output Type | Rail to Rail | - | - |
Product | Operational Amplifiers | - | - |
Supply Type | Single | - | - |
Width | 4 mm (Max) | - | - |
Brand | STMicroelectronics | - | - |
en Input Voltage Noise Density | 76 nV/sqrt Hz | - | - |
Ios Input Offset Current | 1 pA | - | - |
Operating Supply Voltage | 2.7 V to 10 V | - | - |
Product Type | Op Amps - Operational Amplifiers | - | - |
PSRR Power Supply Rejection Ratio | 85 dB | - | - |
Factory Pack Quantity | 2500 | - | - |
Subcategory | Amplifier ICs | - | - |
Voltage Gain dB | 120 dB | - | - |
Unit Weight | 0.017870 oz | - | - |
Part Status | - | - | Active |
Card Type | - | - | Non Specified - Dual Edge |
Gender | - | - | Female |
Number of Positions/Bay/Row | - | - | 35 |
Number of Positions | - | - | 70 |
Card Thickness | - | - | 0.062" (1.57mm) |
Number of Rows | - | - | 2 |
Pitch | - | - | 0.125" (3.18mm) |
Features | - | - | - |
Mounting Type | - | - | Through Hole |
Termination | - | - | Solder |
Contact Material | - | - | Phosphor Bronze |
Contact Finish | - | - | Gold |
Contact Finish Thickness | - | - | 10in (0.25m) |
Contact Type | - | - | Loop Bellows |
Color | - | - | - |
Flange Feature | - | - | Top Mount Opening, Unthreaded, 0.125" (3.18mm) Dia |
Operating Temperature | - | - | -65°C ~ 125°C |
Material Insulation | - | - | Polybutylene Terephthalate (PBT) |
Read Out | - | - | Dual |