Newest Products
  • IMP34DT05 MEMS Audio Sensor Omnidirectional Digita

    STMicroelectronics' IMP34DT05 is a low-distortion digital microphone with a 64 dB signal-to-noise ratio and -26 dBFS ±3 dB sensitivity.

    Date: 2018-12-04
  • MP34DT05-A MEMS Digital Microphone

    STMicro's MP34DT05-A is a MEMS audio sensor, omnidirectional, top-port, digital microphone with low distortion and features the HCLGA package.

    Date: 2018-07-31
  • MP23AB02B MEMS Microphone

    Advanced MEMS microphones generate low levels of distortion, which increase the performance of wearable devices when placing or recording calls.

    Date: 2014-10-29
  • ECMF02-2AMX6 and ECMF04-4AMX12 Common Mode Filters

    STMicroelectronics' common mode filters with the ability to suppress EMI/RFI common mode noises on high speed differential serial buses.

    Date: 2013-07-02
  • SMAxFxxA Series Transient Voltage Suppressors (TVS

    STMicroelectronics' transient voltage suppressors (TVS) are made to resist the stress levels specified to meet all application requirements.

    Date: 2019-03-07
  • ESDA24P140-1U3M Voltage Suppressor

    STMicro's ESDA24P140-1U3M is aimed at protecting USB charging circuits to improve device robustness and lifetime.

    Date: 2018-11-29
  • LDO40L Voltage Regulator

    STMicro's LDO40L is a 400 mA, AEC-Q100 qualified, low dropout voltage regulator designed for use in severe automotive environments.

    Date: 2018-11-07
  • ESDA8P30-1T2 TVS Diode

    STMicroelectronics' ESDA8P30-1T2 unidirectional, single-line TVS diode provides USB VBUS, power supply, and battery protection.

    Date: 2018-11-02
  • ESDA22P150-1U3M 20 V High Power Transient Voltage

    STMicroelectronics' ESDA22P150-1U3M keeps the clamping voltage versus operational voltage ratio below 2 and is housed in a 2.0 mm x 2.0 mm package.

    Date: 2018-10-24
  • ECMF4-2450A60N10 Common Mode Filter

    STMicroelectronics' ECMF™ filters and protects high-speed links, and improves the overall performance and robustness of consumer devices in less than 3 mm².

    Date: 2018-10-15