
DDR2 SDRAM FBDIMM
MT18HTF12872FDZ – 1GB
MT18HTF25672FDZ – 2GB
Features
• 240-pin, DDR2 fully buffered dual in-line memory
module (FBDIMM)
• Fast data transfer rates: PC2-4200, PC2-5300, or
PC2-6400
• 1GB (128 Meg x 72), 2GB (256 Meg x 72)
• 3.2 Gb/s, 4 Gb/s, or 4.8 Gb/s link transfer rates
• High-speed, 1.5V differential, point-to-point link be-
tween the host controller and advanced memory
buffer (AMB)
• Fault-tolerant; can work around a bad bit lane in
each direction
• High-density scaling with up to eight FBDIMM devi-
ces per channel
• SMBus interface to AMB for configuration register
access
• In-band and out-of-band command access
• Deterministic protocol
– Enables memory controller to optimize DRAM ac-
cesses for maximum performance
– Delivers precise control and repeatable memory
behavior
• Automatic DDR2 SDRAM bus and channel calibra-
tion
• Transmitter de-emphasis to reduce ISI
Figure 1: 240-Pin FBDIMM (MO-256 R/C B)
Module height: 30.35mm (1.19in)
Options Marking
• Package
– 240-pin DIMM (halogen-free) Z
• Frequency/CAS latency
– 2.5ns @ CL = 5 (DDR2-800) -80E
– 3.0ns @ CL = 5 (DDR2-667) -667
Features (Continued)
• MBIST and IBIST test functions
• Transparent mode for DRAM test support
• V
DD
= V
DDQ
= 1.8V for DRAM
• V
REF
= 0.9V SDRAM command and address termina-
tion
• V
CC
= 1.5V for AMB
• V
DDSPD
= 3–3.6V for AMB and EEPROM
• Serial presence-detect (SPD) with EEPROM
• Gold edge contacts
• Dual rank
• Supports 95°C operation with 2X refresh
Table 1: Key Timing Parameters
Speed
Grade Industry Nomenclature
Data Rate (MT/s)
t
RCD (ns)
t
RP (ns)
t
RC (ns)CL = 6 CL = 5 CL = 4 CL = 3
-80E PC2-6400 800 800 533 400 12.5 12.5 55
-667 PC2-5300 – 667 533 400 15 15 55
-53E PC2-4200 – – 533 400 15 15 55
1GB, 2GB (x72, DR) 240-Pin DDR2 SDRAM FBDIMM
Features
PDF: 09005aef83d4d75e
htf18c128_256x72fdz.pdf - Rev. C 4/14 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2009 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.