LTC4219IDHC-5#TRPBF Datasheet LTC4219IDHC-12#PBF, LTC4219CDHC-12#PBF, LTC4219CDHC-5#PBF | P16-P18

LTC4219

4219fd

For more information www.linear.com/LTC4219

package DescripTion

DHC Package

16-Lead Plastic DFN (5mm × 3mm)

(Reference LTC DWG # 05-08-1706)

Please refer to http://www.linear.com/product/LTC4219#packaging for the most recent package drawings.

3.00 ±0.10

(2 SIDES)

5.00 ±0.10

(2 SIDES)

NOTE:

1. DRAWING PROPOSED TO BE MADE VARIATION OF VERSION (WJED-1) IN JEDEC

PACKAGE OUTLINE MO-229

2. DRAWING NOT TO SCALE

3. ALL DIMENSIONS ARE IN MILLIMETERS

4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE

MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE

5. EXPOSED PAD SHALL BE SOLDER PLATED

6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE

TOP AND BOTTOM OF PACKAGE

0.40 ±0.10

BOTTOM VIEW—EXPOSED PAD

1.65 ±0.10

(2 SIDES)

0.75 ±0.05

R = 0.115

TYP

R = 0.20

TYP

4.40 ±0.10

(2 SIDES)

169

PIN 1

TOP MARK

(SEE NOTE 6)

0.200 REF

0.00 – 0.05

(DHC16) DFN 1103

0.25 ±0.05

PIN 1

NOTCH

0.50 BSC

4.40 ±0.05

(2 SIDES)

RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS

1.65 ±0.05

(2 SIDES)2.20 ±0.05

0.50 BSC

0.65 ±0.05

3.50 ±0.05

PACKAGE

OUTLINE

0.25 ± 0.05

DHC Package

16-Lead Plastic DFN (5mm × 3mm)

(Reference LTC DWG # 05-08-1706 Rev Ø)

LTC4219

4219fd

For more information www.linear.com/LTC4219

revision hisTory

REV DATE DESCRIPTION PAGE NUMBER

A 8/10 Revised conditions for A

IMON

, I

OFF(IMON)

, and t

PHL(ILIM)

in Electrical Characteristics section. 4

B 10/10 Revised V

INTVCC

TYP value from 3.0 to 3.1 in Electrical Characteristics section

Revised TIMER pin description in Pin Functions section

Revised TM1 + value from 0.2V to 0.21V in Functional Diagram

Revised voltages in 4th paragraph of Operation section

Revised 170mA to 140mA in Turn-Off Sequence section of the Applications Infomation

C 04/15 Typical Application: Added SMAJ22A and 200k EN Resistors

Increased Capacitance on INTV

to 1µF from 0.1µF

Raised I

GATE(DN)

Maximum from 340µA to 400µA

Updated TPCs G02, G09, G11, G12, G14, G16

SET

Pin Function: Recommended Minimum Resistor Value to Be 2k

Figure 1: Added Auto-Retry (Q1), Z1, R2-R4, C

COMP

; Updated C1, R

GATE

Added Paragraph Explaining Auto-Retry with MOSFET Q1

Figures 5, 7: Added Z1, EN Pull-Up Resistors; Updated C1 Value

Typical Application: Added SMAJ22A; Raised INTV

Capacitor to 1µF

Multiple

5, 6, 7

14, 15

D 10/15 Changed input TVS to SMAJ17A in application circuit.

Clarified that operating temperature range refers to ambient.

Added BW

IMON

and t

D(FAULT)

specifications.

Updated INTV

and I

SET

pin functions.

Added equations to calculate MOSFET temperature.

1, 11, 14, 15, 18

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-

tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.

LTC4219

4219fd

For more information www.linear.com/LTC4219

relaTeD parTs

Typical applicaTion

PART NUMBER DESCRIPTION COMMENTS

LTC4210 Single Channel, Hot Swap Controller Operates from 2.7V to 16.5V, Active Current Limiting, SOT23-6

LTC4211 Single Channel, Hot Swap Controller Operates from 2.5V to 16.5V, Multifunction Current Control, MSOP-8 or MSOP-10

LTC4212 Single Channel, Hot Swap Controller Operates from 2.5V to 16.5V, Power-Up Timeout, MSOP-10

LTC4214 Negative Voltage, Hot Swap Controller Operates from 0V to –16V, MSOP-10

LTC4215 Hot Swap Controller with I

C Compatible

Monitoring

Operates from 2.9V to 15V, 8-Bit ADC Monitors Current and Voltage, SSOP-16 and

QFN-24

LTC4217 2A, Hot Swap Controller Operates from 2.9V to 26.5V, Integrated MOSFET and R

SENSE

, SSOP-20 or

5mm × 3mm DFN-16

LTC4218 Single Channel, Hot Swap Controller Operates from 2.9V to 26.5V, Adjustable Current Limit, SSOP-16 and DFN-16

LT4220 Positive and Negative V

oltage, Dual Channels,

Hot Swap Controller

Operates from ±2.7V to ±16.5V, SSOP-16

LTC4221 Dual Hot Swap Controller/Sequencer Operates from 1V to 13.5V, Multifunction Current Control, SSOP-16

LTC4230 Triple Channels, Hot Swap Controller Operates from 1.7V to 16.5V, Multifunction Current Control, SSOP-20

LTC4352 0V to 18V Ideal Diode Controller Operates from 2.9V to 18V, 3mm × 3mm DFN-12 and MSOP-12

LTC4232 5A Integrated Hot Swap Controller Operates from 2.9V to 15V, Adjustable 10% Accurate Current Limit

LTC4233 10A Guaranteed SOA Hot Swap Controller Operates from 2.9V to 15V, Adjustable 11% Accurate Current Limit

LTC4234 20A Guaranteed SOA Hot Swap Controller Operates from 2.9V to 15V, Adjustable 11% Accurate Current Limit

12V, 5A Backplane Resident Application with Insertion Activated Turn-On

1µF

12V

20k

10k

4219 TA02

12V

EN1

EN2

OUT

GATE

GND

MON

SET

LTC4219DHC-12

INTV

TIMER

F LT

OUT

12V

PG = 10.5V

LOAD

ADC

*TVS Z1: DIODES INC. SMAJ17A

 LINEAR TECHNOLOGY CORPORATION 2010

LT 1015 REV D • PRINTED IN USA

Linear Technology Corporation

1630 McCarthy Blvd., Milpitas, CA 95035-7417

(408) 432-1900

●

FAX: (408) 434-0507

●

www.linear.com/LTC4219

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18

LTC4219IDHC-5#TRPBF

Mfr. #:

Buy LTC4219IDHC-5#TRPBF

Manufacturer:

Analog Devices Inc.

Description:

Hot Swap Voltage Controllers 5V, 5A Integrated Hot Swap Controller

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LTC4219IDHC-5#TRPBF

LTC4219IDHC-5#TRPBF

Products related to this Datasheet