NPH10S Series
Isolated 10W Single Output DC/DC Converters
KDC_NPH10SC.J03 Page 8 of 8
www.murata-ps.com/suppor t
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2013 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS PIN CONNECTIONS
Pin Function
1-VIN
2+VIN
3* SS
4+V
OUT
5* TRIM
6-V
OUT
* Optional pins
RECOMMENDED FOOTPRINT DETAILS
TUBE OUTLINE DIMENSIONS
0.8
(20.32)
0.23 (5.84)
0.392 (9.96)
0.2 (5.08)
0.80
(20.32)
0.177 (4.50)
0.146 (3.70)
Ø
0.394
(10.00)
0.98
(25.00)
1.26 (32.00)
*
*
0.041 (1.04)
0.035 (0.90)
3
2
1
4
5
6
XYYWW
NPH10S2403EiC
Weight: 22g
All dimensions in inches ±0.01 (mm ±0.25mm)
All pins on a 0.10 (2.54) pitch and within ±0.01 (0.254) of true position
* Optional control pins
The copper case is connected to the output (-VOUT) pin. Care is needed in the design of this circuit board on which the
converter is mounted. Top side tracks must not contact the edge of the case on the underside of the unit.
Please note that from 2010 onwards you may receive either a blue or a black case finish.
All dimensions in inches ±0.01 (mm ±0.25mm)
Tube length: 20.866 (530) ±2 (0.079)
Tube material: Antistatic coated clear PVC
Tube Quantity: 15
)0-&4
All dimensions in inches ±0.01 (mm ±0.25mm)
* Optional control pins
